Power meter: Difference between revisions

From NURDspace
No edit summary
Line 21: Line 21:
* <s>Install graphing frontend</s> (Grafa on https://metrics.nurd.space)
* <s>Install graphing frontend</s> (Grafa on https://metrics.nurd.space)
* Print a case
* Print a case
* Config ESPhome, possibly using https://esphome.io/components/sensor/pzemac.html
* Config ESPhome, possibly using [https://esphome.io/components/sensor/pzemac.html this component]. Basic config with OTA done and added to [[Jarvis]].
* Fix home assistant bits
* Fix home assistant bits
* Clean up old bits (MQTT and such, old topic: power/main/#)
* Clean up old bits (MQTT and such, old topic: power/main/#)

Revision as of 15:10, 22 August 2020

Power meter
Power meter.jpg
Participants
Skills Electronics
Status Broken
Niche Electronics
Purpose Infra
Tool No
Location
Cost
Tool category

Power meter Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Power meter for the space power usage. Used to run Espurna but it is supported by ESPhome now. Since we needed to flash a fresh ESP8266 board anyway, we will try to use ESPHome.

Hardware

  • ESP8266 (Lolin NodeMCU v3)
  • pzem-004t (aliexpress)

Selection 022.png

Todo

  • Install sensor
  • Install value storage software (InfluxDB on 10.208.11.31)
  • Install graphing frontend (Grafa on https://metrics.nurd.space)
  • Print a case
  • Config ESPhome, possibly using this component. Basic config with OTA done and added to Jarvis.
  • Fix home assistant bits
  • Clean up old bits (MQTT and such, old topic: power/main/#)