Fortinet Fortigate-50B Firewall: Difference between revisions

From NURDspace
No edit summary
mNo edit summary
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Inventory
{{Inventory
|InventoryOwner=Prof_Zonnebloem
|Name=Fortigate-50B
|InventoryStatus=unknown
|Owner=Profzon
|Status=Stored
|Picture=Fortinet2.jpg
}}
}}
AMD Geode (x86 \o/) based Firewall. Socketed PLCC32 BIOS chip and soldered flash chip. The unit runs FortiOS (this is linux, according to [http://gpl-violations.org/news/20050414-fortinet-injunction.html gpl-violations.org]. There's loads of info on [http://www.fortinet.com the manufacturer's site] including a 934 pages long CLI reference.
AMD Geode (x86 \o/) based Firewall. Socketed PLCC32 BIOS chip and soldered flash chip. The unit runs FortiOS (this is linux, according to [http://gpl-violations.org/news/20050414-fortinet-injunction.html gpl-violations.org]. There's loads of info on [http://www.fortinet.com the manufacturer's site] including a 934 pages long CLI reference.
Line 11: Line 13:


== Serial output ==
== Serial output ==
* Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.


<code>
<code>
Reading boot image 1304065 bytes.
FGT50B (14:15-10.01.2008)                                                                 
Initializing firewall...crc errorINITTAR: falling back to normal initrd...
Ver:04000010                                                                             
crc errorFAT: bogus logical sector size 0
Serial number:FGT50B3G10635232                                                           
Kernel panic: VFS: Unable to mount root fs on 01:00
RAM activation
Total RAM: 256MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Press any key to display configuration menu...
......
</code>
 
When you press a key you get:
 
<code>
..
[G]:  Get firmware image from TFTP server.
[F]:  Format boot device.
[I]:  Configuration and information.
[Q]:  Quit menu and continue to boot with default firmware.
[H]:  Display this list of options.
 
</code>
 
When you don't press a key, it continues with:
 
<code>
Reading boot image 1304065 bytes.
Initializing firewall...crc errorINITTAR: falling back to normal initrd...
crc errorFAT: bogus logical sector size 0
Kernel panic: VFS: Unable to mount root fs on 01:00
  FGT50B (14:15-10.01.2008)
  FGT50B (14:15-10.01.2008)
Ver:04000010
Ver:04000010
Serial number:FGT50B3G10635232
Serial number:FGT50B3G10635232
RAM activation
RAM activation
Total RAM: 256MB
Total RAM: 256MB
Enabling cache...Done.
Enabling cache...Done.
Scanning PCI bus...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Boot up, boot device capacity: 64MB.
Press any key to display configuration menu...
Press any key to display configuration menu...
......
......
 
</code>
After this, the unit resets and reading of the boot image starts all over


Hardware info obtained from within bootloader menu:
<code>
OS image name  : flatkc
vendor_id      : AuthenticAMD
cpu family      : 5
model          : 10
model name      : Geode(TM) Integrated Processor by AMD PCS
stepping        : 2
cpu MHz        : 433.201
cache size      : 128 KB
memory          : SDRAM 256MB 333MHz
IDE device channel 0 drive 0:
        No device
IDE device channel 0 drive 1:
        No device
IDE device channel 1 drive 0:
        No device
IDE device channel 1 drive 1:
        No device
</code>
== Firmware flashing ==
Firmware download from a TFTP is working.
There are a lot of images on http://emea.fortinet.net/fortinet/HDimg/ but none for this particular model.
The box refuses all files I tried thusfar:
<code>
Enter local address [192.168.1.188]: 192.168.2.1
MAC:00090FE41BF8
###############
Total 16515225 bytes data downloaded.
Verifying the integrity of the firmware image.
Wrong image for this model.
</code>
</code>

Latest revision as of 10:41, 23 August 2014

Fortigate-50B
Fortinet2.jpg
Owner Profzon
Status Stored
Tool
Tool category

Fortigate-50B

Fortinet2.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Location}}}Property "Tool Location" (as page type) with input value "{{{Location}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.

AMD Geode (x86 \o/) based Firewall. Socketed PLCC32 BIOS chip and soldered flash chip. The unit runs FortiOS (this is linux, according to gpl-violations.org. There's loads of info on the manufacturer's site including a 934 pages long CLI reference.

Serial output

  • Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.

FGT50B (14:15-10.01.2008)                                                                  
Ver:04000010                                                                               
Serial number:FGT50B3G10635232                                                             
RAM activation
Total RAM: 256MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Press any key to display configuration menu...
......

When you press a key you get:

..
[G]:  Get firmware image from TFTP server.
[F]:  Format boot device.
[I]:  Configuration and information.
[Q]:  Quit menu and continue to boot with default firmware.
[H]:  Display this list of options.

When you don't press a key, it continues with:

Reading boot image 1304065 bytes.
Initializing firewall...crc errorINITTAR: falling back to normal initrd...
crc errorFAT: bogus logical sector size 0
Kernel panic: VFS: Unable to mount root fs on 01:00
FGT50B (14:15-10.01.2008)
Ver:04000010
Serial number:FGT50B3G10635232
RAM activation
Total RAM: 256MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Press any key to display configuration menu...
......

After this, the unit resets and reading of the boot image starts all over

Hardware info obtained from within bootloader menu:

OS image name   : flatkc
vendor_id       : AuthenticAMD
cpu family      : 5
model           : 10
model name      : Geode(TM) Integrated Processor by AMD PCS
stepping        : 2
cpu MHz         : 433.201
cache size      : 128 KB
memory          : SDRAM 256MB 333MHz
IDE device channel 0 drive 0:
        No device
IDE device channel 0 drive 1:
        No device
IDE device channel 1 drive 0:
        No device
IDE device channel 1 drive 1:
        No device


Firmware flashing

Firmware download from a TFTP is working.

There are a lot of images on http://emea.fortinet.net/fortinet/HDimg/ but none for this particular model.

The box refuses all files I tried thusfar:

Enter local address [192.168.1.188]: 192.168.2.1
MAC:00090FE41BF8
###############
Total 16515225 bytes data downloaded.
Verifying the integrity of the firmware image.
Wrong image for this model.