Network

From NURDspace

Layer 2 overview

Below you can find the structure of the network as of 10-04-2022. Fat lines are LACP trunks Layer 2 overview 06-05-2022.svg

Layer 3 overview

we have a single-vlan flat network. Due to legacy, three different prefixes live on this vlan:

  • 10.208.11.0/24 (gateway 10.208.11.1)
  • 10.208.30.0/24 (gateway 10.208.30.1)
  • 10.208.42.0/23 (gateway 10.208.42.1)

IP addresses

  • 10.208.30.0/24 is used for static allocations. Register your ip's in IPAM.
  • 10.208.42.0/23 is used for dynamic allocations using DHCP

DNS

search nurd.space lan.nurd.space vm.nurd.space management.nurd.space router.nurd.space dhcp.nurd.space
nameserver 10.208.30.254

Layer 3 simplification

In order to reduce the unnescecary roundtips via the edgerouter, we need to flatten the networks into a single prefix. The proposal for this is to move to 10.208.28.0/22. This prefix would be used as follows (With the gateway living on 10.208.30.1):

  • 10.208.28.1 .. 10.208.29.255 DHCP
  • 10.208.30.1 .. 10.208.30.255 Static clients
  • 10.208.31.0 .. 10.208.30.254 reserved

Management URLs

You can manage our devices using the URLs below:

Product URL User Used for Notes
Edgerouter Lite https://gateway.lan.nurd.space:8443/ ubnt Routing and NATting towards internet
Aruba core switch http://core-sw.lan.nurd.space admin Main switch in the space
Access points https://10.208.43.254:4343/ admin Virtual controller for WIFI
Proxmox coherence https://coherence.lan.nurd.space:8006/ root Deploy LXC/KVM instances on our old hypervisor (dont use for new stuff)
Proxmox erratic https://erratic.lan.nurd.space:8006/ root Deploy LXC/KVM instances on our hypervisor
Erratic IPMI https://erratic-bmc.lan.nurd.space/ ADMIN Remote management of erratic
Harmony NAS https://harmony.lan.nurd.space:5001/ nurds Used for backups Has a different password due to pwd requirements
IPAM ip+dns https://ipam.nurd.space/ ldap IP and DNS registration
LibreNMS http://librenms.vm.nurd.space/ nurds Network device metrics

Per-device port inventory

All devices which are not in librenms need to have documentation for their ports. You can fill this in below:

Fritzbox gamershok

Port Description
0
1
2 To Edgerouter Lite keuken
3

Netgear keuken

Port Description
0 To Dell
1
2
3
4
5
6 Slabbar
7
8 Kodi

Phone rookhok

Port Description
0 To Aruba
1 To Switch rookhok

Switch Rookhok

Port Description
0
1
2
3 Pi Rookhok
4 To phone rookhok

Netgear Bar

Port Description
0 VRCade
1 TickTack
2
3 Switch 3d printer hoek
4
5
6
7 To Aruba

Switch 3d printer hoek

Port Description
0 Printer 3
1 Printer PC
2
3
4 To netgear bar

Zaal 1 switch

TODO: Migrate this to 24p aruba switch, make 2-cable LACP trunk towards core-sw and move zaal 1 ap to 24p aruba switch Device settings

Hostname nurds-sw-01

Port settings

Port Description
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23