16 Screen Wall: Difference between revisions

From NURDspace
No edit summary
No edit summary
Line 97: Line 97:
== Switch ==
== Switch ==
* HP 1910-24G JE006A
* HP 1910-24G JE006A
== Current Status ==
Most of the scripting has been copied over from [9 Screen Wall 1] and is semi-working. In order to complete things properly, the internal networking needs finishing.
* Internal IP range: VLAN1, 192.168.0/24, set untagged on #2-#8, tagged on #1
* External VLAN: 2, set untagged on the external port and #1
* The switch is set up on 192.168.0.254
The current idea is to set up DHCP on #1 on interface eth0.1, set MASQ up between the two interfaces, and allow DNS forwarding over that.

Revision as of 23:20, 6 March 2016

16 Screen Wall
16screen-thingy.jpg
Participants User:zmatt
Skills Linux, X
Status Active
Niche Video artsy stuff
Purpose Fun
Tool No
Location Space
Cost
Tool category

16 Screen Wall

16screen-thingy.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Since 9 screens are obviously not enough (see 9 Screen Wall 1), Petraea built a 16 screen one.




Machines

Machine 1

  • HP Compaq dc7600 Ultra-slim
  • Pentium 4 3GHz
  • 2.25GB DDR2 533MHz RAM (2x 1 GB and 1x 256MB), max 3x1GB

Machine 2

  • HP Compaq dc7600 Ultra-slim
  • Pentium 4 3Ghz
  • 1GB DDR2 533MHz (1x512MB and 2x256MB) Max 3x1GB

Machine 3

  • HP Compaq dc7700p Convertible Minitower
  • Core2 6300 @ 1.86GHz
  • 1GB DDR2 533MHz (2x512MB) (max 4x2GB)

Machine 4

  • Asus 5S800-VM/Vintage
  • Celeron D 2.66GHz running @ 2.8GHz
  • 2GB DDR (2x 1GB, no slots free)

Machine 5

  • HP Compaq dc7600 Ultra-slim
  • Pentium 4 3GHz
  • 2GB DDR2 533MHz (2x 1GB) max 3x 1GB

Machine 6

  • HP Compaq dc7600 Ultra-slim
  • Pentium 4 3GHz
  • 1GB DDR2 (2x512MB, one slot free, max 3GB)

Machine 7

  • HP d330 uT (DG285T)
  • Pentium 4 2.6GHz
  • 2GB (4x512MB, no slots free)

Machine 8

  • Dell Optiplex GX270
  • Pentium 4 * 2.8GHz
  • 2GB DDR RAM (4x512MB, no slots free)

Switch

  • HP 1910-24G JE006A

Current Status

Most of the scripting has been copied over from [9 Screen Wall 1] and is semi-working. In order to complete things properly, the internal networking needs finishing.

  • Internal IP range: VLAN1, 192.168.0/24, set untagged on #2-#8, tagged on #1
  • External VLAN: 2, set untagged on the external port and #1
  • The switch is set up on 192.168.0.254

The current idea is to set up DHCP on #1 on interface eth0.1, set MASQ up between the two interfaces, and allow DNS forwarding over that.