CoreAnet: Difference between revisions

From NURDspace
No edit summary
Line 8: Line 8:
|Tool=No
|Tool=No
}}
}}
== Parts actually used ==
* 14x 30x60mm t-slot extrusion 469mm
* 36x https://www.thingiverse.com/thing:2503636
* 72x slotnut M4 & M4x10-15 , not sure how long
* 2x Z_Axis_Linear_Rail_Bracket_-_Left.stl https://www.thingiverse.com/thing:3268908
* 2x Z_Axis_Linear_Rail_Bracket_-_Right.stl https://www.thingiverse.com/thing:3268908
* 8x slotnut M4 & M4x10-15 , not sure how long
* 2x Z_Motor_Mount_1.0.stl https://www.thingiverse.com/thing:2254103
* 2x nema17 + some mounting screws
* 8x slotnut M4 & M4-10-15, not sure how long
* 2x Z_Axis_Linear_Rail_Bracket_-_Double_Z_-_Left.stl https://www.thingiverse.com/thing:3268908
* 2x Z_Axis_Linear_Rail_Bracket_-_Double_Z_-_Right.stl https://www.thingiverse.com/thing:3268908
* 8x slotnut M4 & M4x10-15 , not sure how long
* 1x XY_Idler_Mount_-_Left_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
* 2x slotnut M4 & M4x10-15 , not sure how long
* 1x M3 about 35mm long?
* some M3 washers to space the bearings
* 4x F605ZZ bearings
* 1x XY_Idler_Mount_-_Right_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
* 2x slotnut M4 & M4x10-15 , not sure how long
* 1x M3 about 35mm long?
* some M3 washers to space the bearings
* 4x F605ZZ bearings
* 1x XY_Stepper_Mount_-_Left_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
* 3x slotnut M4 & M4x10-15 , not sure how long
* 1x nema17 + some mounting screws
* 1x timingbelt pulley + grubscrews
* 1x XY_Stepper_Mount_-_Right_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
* 3x slotnut M4 & M4x10-15 , not sure how long
* 1x nema17 + some mounting screws
* 1x timingbelt pulley + grubscrews
== Why ==
Pokon gifted me a Anet A6 to remix. This page documents what i did with it.
== What ==
<gallery>
<gallery>
Dubious-anetA6.jpg
Dubious-anetA6.jpg
Line 37: Line 85:


</gallery>
</gallery>
== Why ==
Pokon gifted me a Anet A6 to remix. This page documents what i did with it.
== What ==


I want to build a corexy printer and reach mad speeds. We have a pile of aluminium extrusion on which i want to base the frame.
I want to build a corexy printer and reach mad speeds. We have a pile of aluminium extrusion on which i want to base the frame.

Revision as of 23:10, 8 January 2023

CoreAnet
Coreanet-casetest-forwiki.png
Participants User:buzz
Skills Mechanics, reprap, 3D Printing
Status Planning
Niche Hardware
Purpose Tool
Tool No
Location
Cost
Tool category

CoreAnet

Coreanet-casetest-forwiki.png {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}


Parts actually used

  • 14x 30x60mm t-slot extrusion 469mm
  • 1x XY_Idler_Mount_-_Left_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
  • 2x slotnut M4 & M4x10-15 , not sure how long
  • 1x M3 about 35mm long?
  • some M3 washers to space the bearings
  • 4x F605ZZ bearings
  • 1x XY_Idler_Mount_-_Right_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
  • 2x slotnut M4 & M4x10-15 , not sure how long
  • 1x M3 about 35mm long?
  • some M3 washers to space the bearings
  • 4x F605ZZ bearings

Why

Pokon gifted me a Anet A6 to remix. This page documents what i did with it.

What

I want to build a corexy printer and reach mad speeds. We have a pile of aluminium extrusion on which i want to base the frame.

Wishes

  • do >200mm/s comfortably
  • be heavy
  • require no parts i do not already have access to failed, i caved
  • <10 minute benchy!

Wparts

from anet a6 :

  • aluminium heated bed 220x220x3mm
  • 12864 lcd and dubious electronics
  • T8 leadscrews (2x 318mm) 2x T8x8 nuts
  • M8 threaded rods (2x 400mm, 1x 150mm)
  • 8MM smooth rods (2x 418mm , 2x 380mm , 2x 340mm)
  • ~40 M3x18mm bolts and nuts
  • ~15 M4x8mm bolts
  • 3x endstop switches with too short wires (but it comes with some 400mm extenders? hmm)
  • 4x nema17 motors labelled HEM-17D3003
  • 1x extruder , not sure what this is (has two fans , 5150 for partcooling)
  • linear bearings , 4x looks like a SC8UU or SCS8UU , 2x LM8LUU , 2x LMH8LUU

alloted :

  • 12x 30x60 extrusion 469mm long

still to get a purpose :

  • 2x 30x60 extrusion 520mm long
  • 4x 30x30 extrusion 500mm long
  • 2x 30x30 extrusion 483mm long
  • there's also some parts of 2020 extrusion somewhere

bought specifically for it :

  • brass heatinserts
  • some bearings, belts
  • e3d clone lite6
  • bmg clone extruder

Winspiration

Work

  1. Installed Raspbian https://www.raspberrypi.org/downloads/
  2. Installed klipper onto anet electronics and on raspbian https://github.com/KevinOConnor/klipper
  3. Added dwc2-for-klipper-socket https://github.com/Stephan3/dwc2-for-klipper-socket
  4. Installed rpi_ws281x for the leds https://github.com/jgarff/rpi_ws281x