GrundigRGBESP8266

From NURDspace
Revision as of 21:17, 31 January 2015 by Buzz (talk | contribs)
Grundig RGB lamp with ESP8266
Grundig RBG Mood Light PCB.jpg
Participants User:buzz
Skills Electronics, Programming
Status Planning
Niche Electronics
Purpose Infrastructure
Tool No
Location
Cost
Tool category

Grundig RGB lamp with ESP8266

Grundig_RBG_Mood_Light_PCB.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost:: | }}

control mcu pinout

This is the unmarked IC labelled U1 on the silkscreen. , vcc is 4.24-4.3 volts

               -------------
              |   o         |
 vcc      ----| 1         5 |----  gnd
 red pwm  ----| 2         6 |----  blue pwm
 ?        ----| 3         7 |----  green pwm
 ir rx    ----| 4         8 |----  ?
               -------------

Funny bit is, the PWM signal is actually inverse. So they output a high signal to turn off the LED, and a low signal to turn on the LED. This can be proven by grounding one of the pwm output pins, which turns on the respective color of LED.