Korg Monotron Eurorack Mod

From NURDspace
Revision as of 21:58, 27 December 2018 by Dennis (talk | contribs) (Created page with "{{Project |Name=Korg Monotron Eurorack Mod |Skills=Soldering, |Status=Planning |Niche=Electronics |Purpose=Instrument |Picture=Monotron PCB Front.jpg |Tool=No }} = What = The...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Korg Monotron Eurorack Mod
Monotron PCB Front.jpg
Participants Dennis
Skills Soldering
Status Planning
Niche Electronics
Purpose Instrument
Tool No
Location
Cost
Tool category

Korg Monotron Eurorack Mod

Monotron PCB Front.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

What

The idea is to make a eurorack module out of the Korg Monotron synthesizer. The Monotron synths are extremely hackable, Korg released the schematics and a lot of people have published mods. I have the original Monotron.

Todo

  • Remove battery terminals from PCB
  • Design and build a board with the desired in- and outputs, probably on protoboard (called I/O board from this point on)
  • Build a simple board for powering the module (called power board from this point on)
  • Design and build a faceplate
  • Assemble everything together and put it in a eurorack case