Korg Monotron Eurorack Mod

From NURDspace
Revision as of 21:58, 27 December 2018 by Dennis (talk | contribs) (Created page with "{{Project |Name=Korg Monotron Eurorack Mod |Skills=Soldering, |Status=Planning |Niche=Electronics |Purpose=Instrument |Picture=Monotron PCB Front.jpg |Tool=No }} = What = The...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Korg Monotron Eurorack Mod
Monotron PCB Front.jpg
Participants Dennis
Skills Soldering
Status Planning
Niche Electronics
Purpose Instrument
Tool No
Location
Cost
Tool category

Korg Monotron Eurorack Mod

Monotron PCB Front.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

What

The idea is to make a eurorack module out of the Korg Monotron synthesizer. The Monotron synths are extremely hackable, Korg released the schematics and a lot of people have published mods. I have the original Monotron.

Todo

  • Remove battery terminals from PCB
  • Design and build a board with the desired in- and outputs, probably on protoboard (called I/O board from this point on)
  • Build a simple board for powering the module (called power board from this point on)
  • Design and build a faceplate
  • Assemble everything together and put it in a eurorack case