Korg Monotron Eurorack Mod: Difference between revisions

From NURDspace
(Created page with "{{Project |Name=Korg Monotron Eurorack Mod |Skills=Soldering, |Status=Planning |Niche=Electronics |Purpose=Instrument |Picture=Monotron PCB Front.jpg |Tool=No }} = What = The...")
 
No edit summary
Line 16: Line 16:
* Design and build a faceplate
* Design and build a faceplate
* Assemble everything together and put it in a eurorack case
* Assemble everything together and put it in a eurorack case
= Links =
* http://electro-music.com/forum/topic-57134.html
* http://www.dinsync.info/2010/06/how-to-modify-korg-monotron.html
* http://beatnic.jp/?s=monotron%2B%2B
* http://masa921.sitemix.jp/monotron_mod.htm
* http://pjmnc.free.fr/files/midiTron.JPG
* https://ua726.co.uk/2011/01/05/korg-monotron-hacking/
* http://www.marc-nostromo.com/midi-control-for-the-monotron-using-a-teensy-3-0/

Revision as of 23:08, 27 December 2018

Korg Monotron Eurorack Mod
Monotron PCB Front.jpg
Participants Dennis
Skills Soldering
Status Planning
Niche Electronics
Purpose Instrument
Tool No
Location
Cost
Tool category

Korg Monotron Eurorack Mod

Monotron PCB Front.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

What

The idea is to make a eurorack module out of the Korg Monotron synthesizer. The Monotron synths are extremely hackable, Korg released the schematics and a lot of people have published mods. I have the original Monotron.

Todo

  • Remove battery terminals from PCB
  • Design and build a board with the desired in- and outputs, probably on protoboard (called I/O board from this point on)
  • Build a simple board for powering the module (called power board from this point on)
  • Design and build a faceplate
  • Assemble everything together and put it in a eurorack case

Links