LED banner wall

From NURDspace

Revision as of 21:49, 1 February 2013 by Bjornl (Talk | contribs)

Jump to: navigation, search
NURDspace Project
link=File:{{{Name}}}.jpg
Participants Bjornl, Zarya
Skills
Status
Niche
Purpose
Tool
Location
Cost
Tool category
{{{Name}}}
"{{{Name}}}" cannot be used as a page name in this wiki.
"File:{{{Picture}}}" cannot be used as a page name in this wiki.

{{{Picture}}} {{#if:{{{Tool}}} | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:{{{Tool}}} | [[Tool Cost::{{{Cost}}} | }}

Yotson modified a small LED banner sign to be controlled by an Arduino. After hooking it up to the Dockstar and reprogramming SpaceBot it is now located on the speaker next to the 19" rack and displays messages from IRC users.

DeDaan brought in a larger sign. We plan on modifying this as well to have a second banner; if this is working, the smaller one will probably be used to indicate space state to the outside world from behind a window above the front door.

The larger sign contains a separate control unit, programmed using a separate keyboard with a DB-9 like plug. It is attached to a PCB containing the LEDs with a 20 pin flatcable.

The control unit ( http://www.flickr.com/photos/bjornlammers/8425066292/in/photostream ) contains the following ICs:

The Toshiba and the unmarked IC are in a socket, the other two are soldered to the PCB.

The LED panel ( http://www.flickr.com/photos/bjornlammers/8425075284/in/photostream ) contains:

See also this tech-archive thread: http://sci.tech-archive.net/Archive/sci.electronics.repair/2012-06/msg00302.html

 
Our site is hosted by Site4U
Site4U
Our connectivity is made available by BIT
To BIT's website