Manual PNP machine: Difference between revisions

From NURDspace
Line 42: Line 42:
Image:PNP_1.jpg|Base without gantry
Image:PNP_1.jpg|Base without gantry
Image:PNP_2.jpg|The bearings for the X-axis
Image:PNP_2.jpg|The bearings for the X-axis
image:PNP_3.jpg|Now with gantry
Image:PNP_3.jpg|Now with gantry
Image:PNP_4.jpg|Y-axis added
Image:PNP_5.jpg|Close-up of Y-axis bearings
</gallery
</gallery

Revision as of 19:39, 29 March 2015

Manual PNP machine
PNP 3.jpg
Participants
Skills Wood working, assembling
Status Active
Niche Electronics
Purpose Use in other project
Tool Yes
Location
Cost 100
Tool category Electronics

Manual PNP machine

PNP_3.jpg {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::100 | }}


Overview

In order to buils some other stuff, like the NURDled and the CC2850 zigbee modules, we need a more ergonomic method to populate the boards rather than manually populate them with a pair of tweasers. So I'm building a crude, but handy manual PNP machine


Stuff needed

  • Wood
  • USB Microscope
  • Tubing
  • Footswitch
  • Airpump
  • Pickup tool
  • Bearings
  • Misc

Todo

  • Get tubing
  • Convert airpump to vacuumpump
  • Assemble X-axis
  • Assemble Y-axis
  • Assemble Z-axis
  • Mount USB microscope
  • Assemble vaccuum assembly
  • Nurdify

Pics

<gallery> Image:PNP_1.jpg|Base without gantry Image:PNP_2.jpg|The bearings for the X-axis Image:PNP_3.jpg|Now with gantry Image:PNP_4.jpg|Y-axis added Image:PNP_5.jpg|Close-up of Y-axis bearings </gallery