Messing with Sonoff

From NURDspace
Revision as of 02:24, 7 August 2016 by Buzz (talk | contribs)
Messing with Sonoff
Sonoff-on-FTDI.png
Participants User:buzz
Skills ESP8266
Status Active
Niche Electronics
Purpose Use in other project
Tool No
Location
Cost
Tool category

Messing with Sonoff

Sonoff-on-FTDI.png {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Just a projectpage to hold Sonoff knowledge.

It seems the button is connected to GPIO0 , so needs to be held down to get into flashmode.

  • GPIO0 Button
  • GPIO12 Relay
  • GPIO13 Led

Still available; GPIO1 and GPIO3 (aka RX and TX) and, suprisingly, GPIO14 (on the Sonoff TH this is the fifth pin on the 5pin header you use to flash it)