Mobile sentry nerf gun: Difference between revisions

From NURDspace
No edit summary
No edit summary
Line 1: Line 1:
{{Project
{{Project
|Name=Way
|Name=Mobile sentry nerf gun
|Skills=
|Skills=
|Status=Active
|Status=Active
|Niche=Mechanics
|Niche=Mechanics
|Purpose=
|Purpose=
|Picture=
|Picture=Cart.jpg
|Tool=No
|Tool=No
|Location=
|Location=
Line 11: Line 11:
|Category=
|Category=
}}
}}
<gallery>
File:Cart.jpg
File:Battery replacement.jpg
File:Cover removed.jpg
File:Gears1.jpg
</gallery>
== Intro ==
This is a project where I want to build a mobile sentry nerf gun. The first idea was to make a mobile trashcan or at least something that could drive around. But when we discussed some ideas a sentry gun which can be controlled remotely and could drive around sounded the best. We already have a cart that can be remotely controlled and thus we only need to attach a nerf gun to the cart and program it so that we could control the nerf remotely.
This is a project where I want to build a mobile sentry nerf gun. The first idea was to make a mobile trashcan or at least something that could drive around. But when we discussed some ideas a sentry gun which can be controlled remotely and could drive around sounded the best. We already have a cart that can be remotely controlled and thus we only need to attach a nerf gun to the cart and program it so that we could control the nerf remotely.


== Logbook ==


Logbook
'''Friday 29th of August'''


Friday 29th of August
At first we took the cart apart so we could find out why it was making so much noise. Inside there where six 3 volt batteries. These batteries where replaced by 3 lithium-ion batteries. To replace the battery's we had to break the regular battery frame, because the lithium-ion batteries wouldn't fit in the same place. After that we had to solder the 3 batteries together en connect them to the connectors. These connectors where made with soldering two pins to the connectors and the other pins to the batteries. With this we can easily take away the batteries to recharge them. By doing this we made the cart a little bit faster.  
At first we took the cart apart so we could find out why it was making so much noise. Inside there where six 3 volt batteries. These batteries where replaced by 3 lithium-ion batteries. To replace the battery's we had to break the regular battery frame, because the lithium-ion batteries wouldn't fit in the same place. After that we had to solder the 3 batteries together en connect them to the connectors. These connectors where made with soldering two pins to the connectors and the other pins to the batteries. With this we can easily take away the batteries to recharge them. By doing this we made the cart a little bit faster.  
This didn't bring as much noise reduction as that we would have wanted, so we looked for other parts where the noise could come from. Driven by two motors there are eight gears that drive the cart forward. By going from smaller to bigger gears the cart is better able to carry heavier things, which will come in handy later when we mount the nerf gun on it. We lubed all the gears, which made it less noisier. Though it isn't as silent as we want it to be. It is also possible to try to replace the two motors.
This didn't bring as much noise reduction as that we would have wanted, so we looked for other parts where the noise could come from. Driven by two motors there are eight gears that drive the cart forward. By going from smaller to bigger gears the cart is better able to carry heavier things, which will come in handy later when we mount the nerf gun on it. We lubed all the gears, which made it less noisier. Though it isn't as silent as we want it to be. It is also possible to try to replace the two motors.


Links:
== Links ==
http://www.instructables.com/id/Arduino-Controled-Nerf-Vulcan/


http://www.gizmag.com/nerf-vulcan-sentry-gun/28263/
* http://www.instructables.com/id/Arduino-Controled-Nerf-Vulcan/
* http://www.gizmag.com/nerf-vulcan-sentry-gun/28263/

Revision as of 19:51, 30 August 2014

Mobile sentry nerf gun
Cart.jpg
Participants
Skills
Status Active
Niche Mechanics
Purpose
Tool No
Location
Cost
Tool category

Mobile sentry nerf gun

Cart.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost:: | }}

Intro

This is a project where I want to build a mobile sentry nerf gun. The first idea was to make a mobile trashcan or at least something that could drive around. But when we discussed some ideas a sentry gun which can be controlled remotely and could drive around sounded the best. We already have a cart that can be remotely controlled and thus we only need to attach a nerf gun to the cart and program it so that we could control the nerf remotely.

Logbook

Friday 29th of August

At first we took the cart apart so we could find out why it was making so much noise. Inside there where six 3 volt batteries. These batteries where replaced by 3 lithium-ion batteries. To replace the battery's we had to break the regular battery frame, because the lithium-ion batteries wouldn't fit in the same place. After that we had to solder the 3 batteries together en connect them to the connectors. These connectors where made with soldering two pins to the connectors and the other pins to the batteries. With this we can easily take away the batteries to recharge them. By doing this we made the cart a little bit faster. This didn't bring as much noise reduction as that we would have wanted, so we looked for other parts where the noise could come from. Driven by two motors there are eight gears that drive the cart forward. By going from smaller to bigger gears the cart is better able to carry heavier things, which will come in handy later when we mount the nerf gun on it. We lubed all the gears, which made it less noisier. Though it isn't as silent as we want it to be. It is also possible to try to replace the two motors.

Links