Nes to usb: Difference between revisions

From NURDspace
No edit summary
No edit summary
Line 30: Line 30:


after fucking up the nes board Pokon printed the board on the 3d printer just to hold the buttons, after fucking up the keyboard controller smokey asked me if it wasnt simpeler to just make a usb controller out of scratch. .... it is simples but i dont know nothing about coding so from now on Smokey helps me with the everything.
after fucking up the nes board Pokon printed the board on the 3d printer just to hold the buttons, after fucking up the keyboard controller smokey asked me if it wasnt simpeler to just make a usb controller out of scratch. .... it is simples but i dont know nothing about coding so from now on Smokey helps me with the everything.
 
<gallery>
prototype on a breadboard:
File:Nes to usb prototype.jpg|prototype on a breadboard
[[File:Nes to usb prototype.jpg|400px]]
</gallery>
 
Well after SmokeyD went to the other side of the world i was stuck so i switched the project with an teensy 2.0 that buzz had in reserve.
Well after SmokeyD went to the other side of the world i was stuck so i switched the project with an teensy 2.0 that buzz had in reserve.
I got the code for the keyboard layout from fiermans Giant nes project, after usig my very noobish soldering skills the board is working and  
I got the code for the keyboard layout from fiermans Giant nes project, after usig my very noobish soldering skills the board is working and  
 
<gallery>
[[File:Nes to usb.jpg|400px]]
File:Nes to usb.jpg|
[[File:Nes to usb2.jpg|400px]][[File:Nes to usb3.jpg|400px]][[File:Nes to usb4.jpg|400px]]
File:Nes to usb2.jpg|
File:Nes to usb3.jpg|
File:Nes to usb4.jpg|
</gallery>


almost done only two things remain:
almost done only two things remain:
putting it in the controller case (need to saw it)
putting it in the controller case (need to saw it)
and make it work with a raspberry
and make it work with a raspberry

Revision as of 21:31, 25 August 2014

Nes to USB
Nes to usb.jpg
Participants
Skills Basic pc hardware
Status Active
Niche Electronics
Purpose Fun
Tool No
Location
Cost
Tool category

Nes to USB

Nes to usb.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Trying to get my electronical and soldering skills up.

So converting a nes controller to USB for use with emulators.

Parts: Nes controller Old USB keyboard Tact-switches Hot gleu

Tools: Philips head screwdriver Hot glue gun Soldering iron And some thinking

Building: stripping the old keyboard for the controller, dremel a part out of the nes circuit board so the controller and the board fit in the housing of the nes controller

after fucking up the nes board Pokon printed the board on the 3d printer just to hold the buttons, after fucking up the keyboard controller smokey asked me if it wasnt simpeler to just make a usb controller out of scratch. .... it is simples but i dont know nothing about coding so from now on Smokey helps me with the everything.

Well after SmokeyD went to the other side of the world i was stuck so i switched the project with an teensy 2.0 that buzz had in reserve. I got the code for the keyboard layout from fiermans Giant nes project, after usig my very noobish soldering skills the board is working and

almost done only two things remain: putting it in the controller case (need to saw it) and make it work with a raspberry