Networked Audiomixer

From NURDspace
Revision as of 14:45, 22 September 2017 by Buzz (talk | contribs) (→‎Stuff to get)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Networked Audiomixer
NoPicture.png
Participants User:buzz
Skills Electronics
Status Planning
Niche Electronics
Purpose Infra
Tool No
Location
Cost
Tool category

Networked Audiomixer Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

What

We've had experience with hardware like this through the Nexia_PM, but thats a very expensive device.

This project aims to make a simple 4x in 1x out (or maybe 2x out) stereo mixer that is controllable over network -only-.

How

Dreamer suggested this circuit ; https://www.cgs.synth.net/modules/cgs33_matrix_mixer_euro.html

This shows a mono 4 to 1 summing mixer, which would be adequate.

Idea will end up with 2x the input (buffer) circuit, and 4x the output (mixing) circuit

Stuff to get

  • 16 digital potentiometers , possible model X9C104
  • 8 'buffer' opamps , possible NE5532
  • 8 output opamps , ??
  • ferrite beads , ???
  • connectors , ???
  • some powersupply? (this circuit needs -15, 0 and +15V) , maybe this meanwell
  • passives : 36x 100k ohm , 8x 1k ohm , 4x 220 ohm, 12x 100nF , 8x 47pF, 4x 10uF
  • some kinda case?
  • some SBC with line-in and network (and storage?) :)