Nexia PM: Difference between revisions

From NURDspace
No edit summary
mNo edit summary
Line 6: Line 6:
|Location=Small 19" rack in the space
|Location=Small 19" rack in the space
}}
}}
'''This item is on Marktplaats as of 2018-05-19. See [[Marktplaats]]'''


This is a digital mixing panel with lots of inputs and outputs. Currently it has 3 channels open:
This is a digital mixing panel with lots of inputs and outputs. Currently it has 3 channels open:

Revision as of 22:18, 19 May 2018

NURDs Inventory
NEXIA PM.jpg
Owner Space
Status Infrastructure
Hostname nexia.nurdspace.lan
Location Small 19" rack in the space
Tool
Tool category

{{{Name}}}Property "Tool Name" (as page type) with input value "{{{Name}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.

NEXIA_PM.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Small 19" rack in the space

This item is on Marktplaats as of 2018-05-19. See Marktplaats

This is a digital mixing panel with lots of inputs and outputs. Currently it has 3 channels open:

These are mixed and outputted to 2 Altec Lansing 9444A amplifiers at the bottom of the rack.

Making changes to the configuration can be done via the windows software which also runs fine in Wine under Linux. The key is to connect to the Nexia, then disconnect from it, edit the configuration and then upload it again. When in doubt, save the old config first!

IP address has been set to 10.208.30.13 (20170429) to be within the same network as the rest of the space.

To connect with the software, change your static IP to something random in the 10.208.30.* range. Check IPAM or ping to see if it's free first! Go to Tools, Options, Network. Press Select NIC and select the configured network controller.

The device also has a telnet interface. One example command:

echo 'GET 1 IPADDR' |nc nexia 23

More info on Telnet commands: File:Nexia_RS232_Control_(Jan10).pdf

More info on wiring in and outputs : Wiring audio inputs and outputs

Links

http://www.biamp.com/products/nexia/nexia_pm.aspx