PLCC32 in Circuit flash/eeprom Programmer: Difference between revisions

From NURDspace
No edit summary
No edit summary
Line 7: Line 7:
== Goal ==
== Goal ==
Being able to program PLCC32 chips while they remain soldered to the board. The chips are commonly found in a wide range of equipment, including PC motherboards.
Being able to program PLCC32 chips while they remain soldered to the board. The chips are commonly found in a wide range of equipment, including PC motherboards.
[[File:2014-06-14 18.57.40.jpg|thumb|400px|PLCC32 chip soldered on motherboard holding the BIOS]]
 
<gallery>
Image:2014-06-14 18.57.40.jpg|PLCC32 chip soldered on motherboard holding the BIOS
</gallery>
 


== Connector ==
== Connector ==
They can be bought online but are quite expensive, for instance on http://www.hmcelectronics.com/product/Pomona/5733. I do however own a PLCC32 to DIP32 converter. I tried to put a PLCC32 chip in there upside down. When you apply some pressure, all pins seem to connect nicely. Then the idea was born to just use a PLCC32 socket and solder some wires to it to connect it to a programmer.
They can be bought online but are quite expensive, for instance on http://www.hmcelectronics.com/product/Pomona/5733. I do however own a PLCC32 to DIP32 converter. I tried to put a PLCC32 chip in there upside down. When you apply some pressure, all pins seem to connect nicely. Then the idea was born to just use a PLCC32 socket and solder some wires to it to connect it to a programmer.
[[File:2014-06-14 18.57.17.jpg|thumb|400px|PLCC32 to DIP32 converter]]
 
<gallery>
Image:2014-06-14 18.57.17.jpg|PLCC32 to DIP32 converter
</gallery>


== Programmers ==
== Programmers ==

Revision as of 18:09, 14 June 2014

NURDspace Project
link=File:{{{Name}}}.jpg
Participants Dennis
Skills
Status
Niche
Purpose
Tool
Location
Cost
Tool category

{{{Name}}}Property "Tool Name" (as page type) with input value "{{{Name}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:{{{Tool}}} | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:{{{Tool}}} | [[Tool Cost::{{{Cost}}} | }}

Goal

Being able to program PLCC32 chips while they remain soldered to the board. The chips are commonly found in a wide range of equipment, including PC motherboards.


Connector

They can be bought online but are quite expensive, for instance on http://www.hmcelectronics.com/product/Pomona/5733. I do however own a PLCC32 to DIP32 converter. I tried to put a PLCC32 chip in there upside down. When you apply some pressure, all pins seem to connect nicely. Then the idea was born to just use a PLCC32 socket and solder some wires to it to connect it to a programmer.

Programmers