Turnigy Mini Fabrikator II: Difference between revisions

From NURDspace
No edit summary
No edit summary
Line 27: Line 27:
* http://space.nurdspace.nl/~buzz/newsolidobject.profile.gz
* http://space.nurdspace.nl/~buzz/newsolidobject.profile.gz


===Magic Layer Heights===
Slicing on these layerheights greatly improves quality:
* 0.0875
* 0.13125
* 0.175
* 0.21875 (my new default)
* 0.2625
* 0.30625


===Replacement parts===
===Replacement parts===

Revision as of 21:16, 14 March 2020

Turnigy Mini Fabrikator II
Minifabv2.jpg
Participants
Skills knowledge sharing, link gathering
Status Production
Niche Printing
Purpose Tool
Tool No
Location
Cost
Tool category

Turnigy Mini Fabrikator II

Minifabv2.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

This printer is made by Malyan as the M100 model. Not many shops sell it, but hobbyking sells them rebranded :


Some configs and tools


Updated profile 2020

This profile is set to 100% fill and 2 perimeter walls, just variate on that for lesser filled objects. (for example; 4 perimeters and 0% fill work nice for many sculptures)

Magic Layer Heights

Slicing on these layerheights greatly improves quality:

  • 0.0875
  • 0.13125
  • 0.175
  • 0.21875 (my new default)
  • 0.2625
  • 0.30625

Replacement parts

My X belt snapped so i just ordered two new closed loops. I was hoping to use a open ended belt, but seems not fitting.
Both the X and Y belt are B150MXL aka 1200MXL , ~5mm wide so 1200MXL-019.

Many of the parts for a Malyan M200 (aka Monoprice Mini Select (v1/2/3)) are compatible.

Nanopi stuffed inside

Finally stuffed the nanopi that i run octoprint on inside the frame: