Turnigy Mini Fabrikator II

From NURDspace
Revision as of 22:16, 14 March 2020 by Buzz (talk | contribs)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Turnigy Mini Fabrikator II
Minifabv2.jpg
Participants
Skills knowledge sharing, link gathering
Status Production
Niche Printing
Purpose Tool
Tool No
Location
Cost
Tool category

Turnigy Mini Fabrikator II

Minifabv2.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

This printer is made by Malyan as the M100 model. Not many shops sell it, but hobbyking sells them rebranded :


Some configs and tools


Updated profile 2020

This profile is set to 100% fill and 2 perimeter walls, just variate on that for lesser filled objects. (for example; 4 perimeters and 0% fill work nice for many sculptures)

Magic Layer Heights

Slicing on these layerheights greatly improves quality:

  • 0.0875
  • 0.13125
  • 0.175
  • 0.21875 (my new default)
  • 0.2625
  • 0.30625

Replacement parts

My X belt snapped so i just ordered two new closed loops. I was hoping to use a open ended belt, but seems not fitting.
Both the X and Y belt are B150MXL aka 1200MXL , ~5mm wide so 1200MXL-019.

Many of the parts for a Malyan M200 (aka Monoprice Mini Select (v1/2/3)) are compatible.

Nanopi stuffed inside

Finally stuffed the nanopi that i run octoprint on inside the frame: