Window Isolation

From NURDspace

Jump to: navigation, search
Window Isolation
Open window.jpg
Participants
Skills
Status Planning
Niche
Purpose Saving energy and money
Tool No
Location Space
Cost
Tool category

Window Isolation

open_window.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

If you are looking for a guide for how to install Windows on a virtual machine, click here.

What

We have a large energy bill, a lot of heat disappears through our current windows (see FLIR pics), so it would be good to do something about this.

Polycarbonate sheets

W can get (free?) polycarbonate sheets via Pokon. They could be mounted against the existing glass windows. Approx measurements 205 x 125 cm.

Glass

Alternatively we could consider buying HR+++ triple glass for instance here https://www.dubbelglas.nu/isolatieglas/triple/energie/. qjb talked about http://elkimi.nl/, they can deliver and install glass for a good price.

Subsidies

A short investigation into options to subsidize the project can be found here isolation-subsidies.

Measurements

Main room

Measurements below are in centimeters, and are the desired size of the boards to be installed. These are obviously slightly larger than the actual glass surface they will be covering to account for attachment surface.

Left and right are from the viewpoint inside the space, not from the street.

1

68 x 173

2

103 x 173

  • plate has been cut and mounted

3

67 x 173

4

68 x 127

5

123 x 169

  • plate has been cut and mounted

6

47 x 60

7

59 x 106

  • plate has been cut and mounted

Printer corner

Large window

  • 193x164

Door

  • 119x59

Small window

  • 43x71
  • With fan, so we need to cut out a bit

Hallway

Door

  • 98x68

Window above door

  • 45x91

Tool room

Lower window right

  • 99x53

Upper window right

  • 43x53

Large window

  • 244x165

Lower window left

  • 96x52

Upper window left

  • 53x62
  • With fan, so a part needs to be cut out

Game room

Large window side

  • 145x257

Window above door

  • 53x80
  • Volkshuis sign

Door

  • 59x122

Large window front

  • 165x225

Upper small window

  • 48x54

Lower small window

  • 62x118


List of steps to undertake

(Simple mockup for now!)

1: measure window dimensions (incl mounting size)

1a: if not sufficient material present: get it to the space and add some headroom.

2: make sure for sufficient work area to do the other steps

3: cut isolation sheets to size after size confirmation (tip: try to make efficient use of the sheets)

4: test fit the sheets

5: pre drill holes in the sheets with foil still attached

6: clean the needed windows to be free of any debris (and fat fingers!)

7: apply the glue in prepariation

8: remove top portion (10cm or so) of the foil and align it with the window

9: screw in the top row of screws

10: slowly pull more foil off from top to bottom (remove stains if created in the progress)

11: now screw the rest of the screws in (top to bottom)

12: once done, remove the other foil coating (faceing building inside)

13: tidy it up?

 
Our site is hosted by Site4U
Site4U
Our connectivity is made available by BIT
To BIT's website