Prusa i3

From NURDspace
(Redirected from Prusa I3)
Prusa i3
NoPicture.png
Participants User:buzz
Skills Mechanics
Status Finished
Niche Mechanics
Purpose Infrastructure
Tool No
Location
Cost
Tool category

Prusa i3 Property "Tool Image" (as page type) with input value "File:" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.

{{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost:: | }}

So, it seems we are going to be build 3 Prusa I3 printers sometime in the future.

This page is an attempt to document it all, our own little BOM. (bill of materials)

Partslog

The Fablab printer is neaaaaaaaaaaaarly done! See; http://imgur.com/a/zVTX3

--buZz (talk) 13:19, 10 October 2013 (CEST)


And some more ordering!

  • TallOak 1x reprap.me PCB Heatbed MK2 - 19.15
  • TallOak 1x EPCOS G550 thermistor ( B57550G104J ) - 4.14
  • laafwerpen 1x reprap.me PCB Heatbed MK2 - 19.15
  • laafwerpen 1x EPCOS G550 thermistor ( B57550G104J ) - 4.14

--buZz (talk) 13:00, 22 May 2013 (CEST)


Ordered moar stuff today

  • TallOak 2x 1m M5 threaded rods - 5.62
  • TallOak 2.5M T2.5 belt - 14.30
  • Fablab 2x 1m M5 threaded rods - 5.62
  • Fablab 2.5M T2.5 belt - 14.30
  • laafwerpen 2x 1m M5 threaded rods - 5.62
  • laafwerpen 2.5M T2.5 belt - 14.30

--buZz (talk) 15:39, 16 May 2013 (CEST)


And again! Some ordering!

  • TallOak J-Head Mk V-B 0.4mm - 46.35
  • Fablab J-Head Mk V-B 0.4mm - 46.35

--buZz (talk) 23:26, 3 May 2013 (CEST)


Ordered some more!

  • TallOak 10x LM8UU - 5.25
  • TallOak 2x T2.5 pulley - 12.15

spent; 17.40

  • laafwerpen 10x LM8UU - 5.25
  • laafwerpen 2x T2.5 pulley - 12.15

spent; 17.40

  • Fablab 7x LM8UU - 3.67
  • Fablab 3x LM8UUOP - 1.58
  • Fablab 2x T2.5 pulley - 12.15

spent; 17.40

We still need (and should get money for ~soon) :

  • hotends
  • heated beds
  • belts
  • m5 threaded rod (as profzon cant deliver on that :( )

--buZz (talk) 05:56, 28 April 2013 (CEST)


Gave profzon a list of 8mm smooth rods required today :P He is hopeful to fill the order within 3 weeks! *crosses fingers*

--buZz (talk) 21:58, 24 April 2013 (CEST)


YAY!!! ordered a big chunk today FINALLY

  • TallOak 4x pololu drivers - 48.36
  • TallOak 5x wantai motors - 66.55
  • TallOak 1x RAMPS 1.4 presoldered - 55.91
  • TallOak 1x 12v 30a - 23.64
  • TallOak 1x hobbed bolt - 7.25
  • TallOak 3x endstops - 1.43
  • TallOak 1x 40mm fan - 1.27

spent; 204.41

  • laafwerpen 1x 12v 30a - 23.64
  • laafwerpen 1x hobbed bolt - 7.25
  • laafwerpen 3x endstops - 1.43
  • laafwerpen 1x 40mm fan - 1.27

spent; 33.59

  • Fablab 1x 24v 15a - 21.97
  • Fablab 1x hobbed bolt - 7.25
  • Fablab 3x endstops - 1.43
  • Fablab 1x 40mm fan - 1.27

spent; 31.92

Also ordered 2kg of PLA, grey and smurfblue - 41.12

Now we have to wait on the part laafwerpen ordered ~beginning of april and the parts profzon is going to bring...

--buZz (talk) 21:10, 22 April 2013 (CEST)


Meh, moneytrain is slow ....

In other news, http://www.rrd.bz/ has (unasked) sponsored us with a Rumba incl 6 stepperdrivers, 3 Pulleys of unknown size and a cable set.

--buZz (talk) 14:40, 16 April 2013 (CEST)


FINALLY TOMORROW we are going to order moar parts :D

Belts & Pulleys;

Bearings;


And maybe 5 moar motors for TallOak? :) Oh! and a load of plastic :D

--buZz (talk) 00:51, 29 March 2013 (CET)


So I've started printing parts, first 3 sets, but now maybe 4...

Also, i've bought the spare motorstock from the0, 10 pieces of Wantai motors for 100. We still need 5 extra (Dupe doesn't need motors)

And we got a 4pi from Kliment (and some 624 bearings) for 100 euro. This is ment for the Fablab.

Regarding smooth rods, it seems profzon could still deliver them but is way too busy to do so now, so we will have to look elsewhere. He _is_ able to provide the M5 threaded rod and M8 nuts&bults and will do so ~quickly

--buZz (talk) 22:49, 14 March 2013 (CET)

Attempt at full BOM per printer

FabLab - Stretched Limo i3
4pi electronics Kliment 100.00
raspberry pi embeddedcomputer.nl 49.10
J-Head 0.4mm reifsnyderb 46.35
5x Wantai 42BYGHW811 reprapworld.com 55.52
Hyena 1.0 clone reprapworld.com 7.25
7x LM8UU bearings ebay 3.67
3x LM8UUOP bearings ebay 1.58
24V 15A psu ebay 21.97
2x T2.5 pulleys ebay 12.15
3x Endstop switches ebay 1.43
40mm 12V fan ebay 1.27
2x 1M M5 threaded rod ijzershop.nl 5.62
2.5M T2.5 belt ebay 14.30
Current total 326.21


TallOak - stock i3
RAMPS 1.4 presolderd reprapworld.com 55.91
4x Pololu A4988 Drivers reprapworld.com 48.36
J-Head 0.4mm reifsnyderb 46.35
5x Wantai 42BYGHW811 reprapworld.com 55.52
Hyena 1.0 clone reprapworld.com 7.25
10X LM8UU bearings ebay 5.25
12V 30A psu ebay 23.64
2x T2.5 pulleys ebay 12.15
3x Endstop switches ebay 1.43
40mm 12V fan ebay 1.27
2x 1M M5 threaded rod ijzershop.nl 5.62
2.5M T2.5 belt ebay 14.30
reprap.me PCB Heatbed ebay 19.15
EPCOS G550 thermistor xyzprinters 4.14
Current total 300.34


Laafwerpen - foldable i3
5x Wantai 42BYGHW811 reprapworld.com 55.52
Hyena 1.0 clone reprapworld.com 7.25
10X LM8UU bearings ebay 5.25
12V 30A psu ebay 23.64
2x T2.5 pulleys ebay 12.15
3x Endstop switches ebay 1.43
40mm 12V fan ebay 1.27
2x 1M M5 threaded rod ijzershop.nl 5.62
2.5M T2.5 belt ebay 14.30
reprap.me PCB Heatbed ebay 19.15
EPCOS G550 thermistor xyzprinters 4.14
Current total 149.72

Participants and Printer Plans

We have 4 participants in total.

Fablabwag

Stretched i3! 21x27x30cm printarea.

  • Smooth 8mm rods; 2x 48 2x 54 2x 56
  • M5 threaded rod; 2x 54
  • Jhead 0.4mm 3mm filament

4pi electronics, and a raspi with octoprint. <-- already ordered

Laafwerpen

Special remix with foldable Y axis

  • Smooth 8mm rods; 2x 47 2x 57 2x 56
  • M5 threaded rod; 2x 54
  • 2x Jhead 0.4mm 3mm filament
  • Arduino + shield

Tall0ak

Totally stock i3, using the Arduino 2560 that Tall0ak already has.

  • Smooth 8mm rods; 4x 47 2x 41
  • M5 threaded rod; 2x 39

Dupe

Single framed i3

  • PSU
  • smooth & threaded ... Length??
  • nuts & bolts
  • bearings (LM8UU + rest?)
  • belts & pulleys
  • endstops
  • fans

Needed

power supply

Currently i am using a 12V supply for everything, but it is quite possible to heat the bed on 24V and run the motors on 12V. Maybe

40 euro

hotend

I don't see any reason to not use a J-Head.. 0.5 is fast but i might follow ID and profzon and go for 0.4..

60 euro

hobbed bolt

Arcol's hyena is awesome :)

15 euro

electronics

No idea yet.. Maybe go for 4pi?

Or this thingy for cheapness?

stepper drivers

Provided we are _not_ going for 4pi, we need some. Stepsticks should be fine.

stepper motors

They cut us a deal earlier, maybe we can try it again?

55 euro

smooth rods

Not sure, maybe profzon has an idea about this?

Stainless: http://www.fnf-metaal.nl/roestvaststaal/leveringsprogramma/rvs-staf http://www.rvsland.nl/Webwinkel-Product-5856865/Staf-RVS304-%C3%98-8-mm-H9.html

Typically ~3 EUR per metre. ~3m per printer (not including inefficiencies etc.) ~10-15 EUR. TallOak (talk) 15:09, 29 January 2013 (CET)

20 euro

threaded rods

We have a shitload of M8 threaded rod on the space already, we _will_ probably need to get ~5 meter of M5 rod.

10 euro

nuts & bolts

Again, not sure... profzon?

10 euro

bed heating

I would like to maybe experiment with a different sized bed, seeing as this is available for not much more money.

30 euro

build surface

Piece of glass from the neighbours? Or maybe finally use that piece of scanner glass i've been saving.. hmmm

5 euro

bearings

10 LM8UU style and a couple of 608 and maybe a 624?

We have some 608 floating around in the space ...

6 euro

printed parts

Yes yes

belts & pulleys

T2.5! So ...

Or;

25 euro

endstops

2 euro

fan

2 euro

frame

Right, choices are to be made. Which wood, if wood at all? Boxed version? Single plate?

Boxed version;

  • Some wood

20 euros?

Single frame;

  • milled/waterjet piece of alu?

80 euros?

Total

280 euros , missing electronics 300 euros for boxed version, missing electronics
360 euros for single frame version, missing electronics

Wow, really 280? This can't be right :P Ah, missing the frame.


Links

Retrieved from "https://nurdspace.nl/index.php?title=Prusa_i3&oldid=5361"