Eurorack PSU Breadboard Adapter

From NURDspace

Revision as of 19:45, 21 August 2020 by Dennis (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Eurorack PSU Breadboard Adapter
Eurorack PSU breadboard adapter3.jpg
Participants Dennis
Skills Soldering
Status Finished
Niche Electronics
Purpose Use in other project
Tool No
Location
Cost
Tool category

Eurorack PSU Breadboard Adapter

Eurorack PSU breadboard adapter3.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

I am planning to design some Eurorack synthesizer modules. Since the PSU part is basically the same everytime, I decided to make an adapter that will fit on a breadboard and will take standard -12V and +12V from a Eurorack power supply. I basically made the PSU part of this schematic (page 3) and added two LEDs to have some visual feedback of the PSU status. Green is +12V and red is -12V.

 
Our site is hosted by Site4U
Site4U
Our connectivity is made available by BIT
To BIT's website