Irctv: Difference between revisions

From NURDspace
No edit summary
Line 34: Line 34:


* raspberry pi 1 directly connected to a tv
* raspberry pi 1 directly connected to a tv
** runs: mplayer from .profile started by 'nurds' user
** runs: ffmpeg started by a systemd service
** SD-card is mounted read-only(!)
** SD-card is mounted read-only(!)
*** https://gist.github.com/nicokaiser/08aa5b7b3958f171cf61549b70e8a34b without the overlay part
*** https://gist.github.com/nicokaiser/08aa5b7b3958f171cf61549b70e8a34b without the overlay part
** ip address: 10.208.30.14
** ip address: irctv.lan.nurd.spce


=== backend ===
=== backend ===

Revision as of 19:54, 14 May 2022

IRCTV
Irctv.jpg
Participants
Skills
Status Active
Niche Artsy stuff
Purpose Unknown
Tool No
Location Space
Cost
Tool category

IRCTV

Irctv.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

what it is

An IRSSI connected to the #nurds channel on oftc on a big TV that was found in the rain outside at the trash.

urls etc


  • login with ssh (user nurds and well known password) into 10.208.30.111


  • you can also stream a video-stream to it via multicast on address 239.168.0.1 port 11000
    • e.g.: gst-launch-1.0 v4l2src ! videoconvert ! video/x-raw, format=YUY2 ! jpegenc ! rtpjpegpay ! udpsink host=239.168.0.1 auto-multicast=true port=11000

how it is configured

display

backend

  • container (10.208.30.111) on coherence runs the backend - user irctv
    • termcamng listens on telnet and ssh
      • port 2300 for telnet, port 2200 for ssh
      • port 8080 for the png-stream
      • telnet has *no* authentication, ssh authenticates (via pam) against the local user-file
      • ssh/telnet bring you into the irssi session where you can interact with it
  • on egg:
    • there should be a user irc2mqtt in the irc channel
    • that user is irc-to-mqtt.sh and .py on egg, runs in user flok. should be migrated to r3boot's bot.

Irctv.jpg