SpaceModular: Difference between revisions

From NURDspace
No edit summary
No edit summary
Line 2: Line 2:
|Name=SpaceModular
|Name=SpaceModular
|Owner=Space
|Owner=Space
|Status=In need of modules
|Status=Usable
|Picture=SpaceModularEmpty.jpg
|Picture=SpaceModular2.jpg
|Tool=Yes
|Tool=Yes
|Category=Music production
|Category=Music production
Line 17: Line 17:
</gallery>
</gallery>
= Modules =
= Modules =
None yet :<
Progress \o/
<gallery>
SpaceModularEmpty.jpg
SpaceModular2.jpg
</gallery>
* [https://www.modulargrid.net/e/other-unknown-cv-twister-wave-warper CV Twister/Wave Warper]
* [http://www.doepfer.de/a1902.htm Doepfer A-190-2 MIDI to cv (possibly broken)]
= Supplies =
= Supplies =
There's a little box with screws and washers and it will contain more ribbon cables in the future
There's a little box with screws and washers and it will contain more ribbon cables in the future

Revision as of 20:43, 13 June 2020

SpaceModular
SpaceModular2.jpg
Owner Space
Status Usable
Location Studio
Tool Yes
Tool category Music production

SpaceModular

SpaceModular2.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Studio

What

Eurorack modular synthesizer. We have a 3U 19" case in which we want to experiment and play with eurorack synth modules.

Powah

For now we will start with a USBPowerThingy. This is a USB powered busboard with 6 connectors (3x 10 pins and 3x 16 pins). When we run out of space or juice, we can look for another solution. The board is mounted, but the location and manner is not ideal, but for now it'll do.

Modules

Progress \o/

Supplies

There's a little box with screws and washers and it will contain more ribbon cables in the future

Todo

  • Design and print a mount for the USBPowerThingy
  • Wait for ordered ribbon cables (3 times 10 pins on both sides) and put them in the USBPowerThingy
  • Better solution for power, possibly using the 230V connector on the back and switch on the front (USB brick inside the rack?)
  • Maybe a better USB brick, the one we use now is 1A
  • Maybe put a top cover on the rack