Eurorack PSU Breadboard Adapter: Difference between revisions
Jump to navigation
Jump to search
(Created page with "{{Project |Name=Eurorack PSU Breadboard Adapter |Skills=Soldering, |Status=Finished |Niche=Electronics |Purpose=Use in other project |Picture=Eurorack PSU breadboard adapter3....") |
(No difference)
|
Revision as of 18:43, 21 August 2020
| Eurorack PSU Breadboard Adapter | |
|---|---|
| Participants | Dennis |
| Skills | Soldering |
| Status | Finished |
| Niche | Electronics |
| Purpose | Use in other project |
| Tool | No |
| Location | |
| Cost | |
| Tool category | |
Eurorack PSU Breadboard Adapter
Eurorack PSU breadboard adapter3.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
I am planning to design some Eurorack synthesizer mudules. Since the PSU part is basically the same everytime, I decided to make an adapter that will fit on a breadboard and will take standard -12V and +12V from a Eurorack power supply. I basically made the PSU part of this schematic (page 3) and added two LEDs to have some visual feedback of the PSU status. Green is +12V and red is -12V. <gallery> Eurorack PSU breadboard adapter1.jpg|Adapter front Eurorack PSU breadboard adapter2.jpg|Adapter back Eurorack PSU breadboard adapter3.jpg|Adapter on breadboard </gallery