CoreAnet

CoreAnet
Participants	User:buzz
Skills	Mechanics, reprap, 3D Printing
Status	Planning
Niche	Hardware
Purpose	Tool
Tool	No
Location
Cost
Tool category

CoreAnet

Coreanet-casetest-forwiki.png {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Why

Pokon gifted me a Anet A6 to remix. This page documents what i did with it.

What

I want to build a corexy printer and reach mad speeds. We have a pile of aluminium extrusion on which i want to base the frame.

Wishes

• do >200mm/s comfortably
• be heavy
• require no parts i do not already have access to

Wparts

from anet a6 :

• aluminium heated bed 220x220x3mm
• 12864 lcd and dubious electronics
• T8 leadscrews (2x 318mm) 2x T8x8 nuts
• M8 threaded rods (2x 400mm, 1x 150mm)
• 8MM smooth rods (2x 418mm , 2x 380mm , 2x 340mm)
• ~40 M3x18mm bolts and nuts
• ~15 M4x8mm bolts
• 3x endstop switches with too short wires (but it comes with some 400mm extenders? hmm)
• 4x nema17 motors labelled HEM-17D3003
• 1x extruder , not sure what this is (has two fans , 5150 for partcooling)
• linear bearings , 4x looks like a SC8UU or SCS8UU , 2x LM8LUU , 2x LMH8LUU

alloted :

• 12x 30x60 extrusion 469mm long

still to get a purpose :

• 2x 30x60 extrusion 520mm long
• 4x 30x30 extrusion 500mm long
• 2x 30x30 extrusion 483mm long
• there's also some parts of 2020 extrusion somewhere

Winspiration

• https://www.thingiverse.com/thing:1752766 - HyperCube 3D Printer/CNC
• https://www.thingiverse.com/thing:2503636 - The BEST 3030 corners. Single and dual.
• https://www.thingiverse.com/thing:3268908 - Hypercube Evolution Anet A8 Remix
• https://www.thingiverse.com/thing:3613857 - Bondtech BMG Direct for Hypercube Evolution -NO BRASS INSERT-
• https://www.thingiverse.com/thing:2617424 - Hypercube Evolution Complete Hotend Assembly

Work

1. Installed Raspbian https://www.raspberrypi.org/downloads/
2. Installed klipper onto anet electronics and on raspbian https://github.com/KevinOConnor/klipper
3. Added dwc2-for-klipper-socket https://github.com/Stephan3/dwc2-for-klipper-socket
4. Installed rpi_ws281x for the leds https://github.com/jgarff/rpi_ws281x