(→Why) |
(→Wparts) |
||
Line 75: | Line 75: | ||
* 2x 30x30 extrusion 483mm long | * 2x 30x30 extrusion 483mm long | ||
* there's also some parts of 2020 extrusion somewhere | * there's also some parts of 2020 extrusion somewhere | ||
bought specifically for it : | |||
* brass heatinserts | |||
* some bearings, belts | |||
* e3d clone lite6 | |||
* bmg clone extruder | |||
== Winspiration == | == Winspiration == |
Revision as of 02:46, 11 December 2021
CoreAnet | |
---|---|
Participants | User:buzz |
Skills | Mechanics, reprap, 3D Printing |
Status | Planning |
Niche | Hardware |
Purpose | Tool |
Tool | No |
Location | |
Cost | |
Tool category |
Coreanet-casetest-forwiki.png {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
Why
Pokon gifted me a Anet A6 to remix. This page documents what i did with it.
What
I want to build a corexy printer and reach mad speeds. We have a pile of aluminium extrusion on which i want to base the frame.
Wishes
- do >200mm/s comfortably
- be heavy
- require no parts i do not already have access to
Wparts
from anet a6 :
- aluminium heated bed 220x220x3mm
- 12864 lcd and dubious electronics
- T8 leadscrews (2x 318mm) 2x T8x8 nuts
- M8 threaded rods (2x 400mm, 1x 150mm)
- 8MM smooth rods (2x 418mm , 2x 380mm , 2x 340mm)
- ~40 M3x18mm bolts and nuts
- ~15 M4x8mm bolts
- 3x endstop switches with too short wires (but it comes with some 400mm extenders? hmm)
- 4x nema17 motors labelled HEM-17D3003
- 1x extruder , not sure what this is (has two fans , 5150 for partcooling)
- linear bearings , 4x looks like a SC8UU or SCS8UU , 2x LM8LUU , 2x LMH8LUU
alloted :
- 12x 30x60 extrusion 469mm long
still to get a purpose :
- 2x 30x60 extrusion 520mm long
- 4x 30x30 extrusion 500mm long
- 2x 30x30 extrusion 483mm long
- there's also some parts of 2020 extrusion somewhere
bought specifically for it :
- brass heatinserts
- some bearings, belts
- e3d clone lite6
- bmg clone extruder
Winspiration
- https://www.thingiverse.com/thing:1752766 - HyperCube 3D Printer/CNC
- https://www.thingiverse.com/thing:2503636 - The BEST 3030 corners. Single and dual.
- https://www.thingiverse.com/thing:3268908 - Hypercube Evolution Anet A8 Remix
- https://www.thingiverse.com/thing:3613857 - Bondtech BMG Direct for Hypercube Evolution -NO BRASS INSERT-
- https://www.thingiverse.com/thing:2617424 - Hypercube Evolution Complete Hotend Assembly
Work
- Installed Raspbian https://www.raspberrypi.org/downloads/
- Installed klipper onto anet electronics and on raspbian https://github.com/KevinOConnor/klipper
- Added dwc2-for-klipper-socket https://github.com/Stephan3/dwc2-for-klipper-socket
- Installed rpi_ws281x for the leds https://github.com/jgarff/rpi_ws281x