Line 51: | Line 51: | ||
*** constatus currently listens on the mqtt feed "irc/urls/#", see /home/constatus/constatus/termcamng.cfg | *** constatus currently listens on the mqtt feed "irc/urls/#", see /home/constatus/constatus/termcamng.cfg | ||
* on egg: | |||
** there should be a user irc2matt in the irc channel | |||
** that user is irc-to-mqtt.sh and .py on egg, runs in user flok. should be migrated to r3boot's bot. | |||
[[File:Irctv.jpg|640px]] | [[File:Irctv.jpg|640px]] |
Revision as of 14:11, 5 March 2022
IRCTV | |
---|---|
Participants | Berend |
Skills | |
Status | Active |
Niche | Artsy stuff |
Purpose | Unknown |
Tool | No |
Location | Space |
Cost | |
Tool category |
Irctv.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
what it is
An IRSSI connected to the #nurds channel on oftc on a big TV that was found in the rain outside at the trash.
urls etc
- http://10.208.30.111:8080/stream.mpng high res, uses more bandwidth
- http://10.208.30.111:8080/stream.mjpeg same res :-) but with jpeg artifacts and hopefully less bandwidth usage. might also be more compatible with all web-browse devices out there
- http://10.208.42.159:8070/stream.mjpeg?inst=terminal-stream if you want to see the images pasted in the irc-channel as an overlay (2 fps)
- http://10.208.42.159:8071/stream.mjpeg?inst=terminal-stream if you want to see the images pasted in the irc-channel as an overlay (15 fps)
- login with ssh (user nurds and well known password) into 10.208.30.111
- you can also stream a video-stream to it via multicast on address 239.168.0.1 port 11000
- e.g.: gst-launch-1.0 v4l2src ! videoconvert ! video/x-raw, format=YUY2 ! jpegenc ! rtpjpegpay ! udpsink host=239.168.0.1 auto-multicast=true port=11000
how it is configured
display
- raspberry pi 1 directly connected to a tv
- runs: mplayer from .profile started by 'nurds' user
- ip address: 10.208.30.14
backend
- container (10.208.30.111) on coherence runs the backend - user irctv
- termcamng listens on telnet and ssh
- port 2300 for telnet, port 2200 for ssh
- port 8080 for the png-stream
- telnet has *no* authentication, ssh authenticates (via pam) against the local user-file
- ssh/telnet bring you into the irssi session where you can interact with it
- termcamng listens on telnet and ssh
- on the ticker pi:
- constatus listens on port 8070
- http://10.208.42.159:8070/stream.mjpeg?inst=terminal-stream
- constatus currently listens on the mqtt feed "irc/urls/#", see /home/constatus/constatus/termcamng.cfg
- constatus listens on port 8070
- on egg:
- there should be a user irc2matt in the irc channel
- that user is irc-to-mqtt.sh and .py on egg, runs in user flok. should be migrated to r3boot's bot.