Eurocrack opamp: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=== Testing of opamps for Eurocrack module === * see [Nurdspace eurorack raspberry pi hat] === method of testing === * sine wave from Doeper A-147 VCLFO module * [https:...") |
(No difference)
|
Revision as of 22:34, 15 July 2022
Testing of opamps for Eurocrack module
- see [Nurdspace eurorack raspberry pi hat]
method of testing
- sine wave from Doeper A-147 VCLFO module
- schematic for +/-5V to 3.3V in breadboard
- most opamps were tested with a 33k resistor from output to inverting input of the opamp. the best opamp was also tried with 30k ohm.
- most opamps showed clipping
TL072
- datasheet: https://www.ti.com/product/TL072
LM358P
MCP6002
Also tried with 30k resistor as with 33k, the ADC used (MCP3008) clipped too much: