(Created page with "{{Project |Name=RJ45 bridge module for eurorack |Skills=3D Printing, PCB design, Soldering, |Status=Done |Niche=Music |Purpose=Instrument |Tool=No }} = What = RJ45 to minijac...") |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
|Niche=Music | |Niche=Music | ||
|Purpose=Instrument | |Purpose=Instrument | ||
|Picture=Nizl-39.jpg | |||
|Tool=No | |Tool=No | ||
}} | }} | ||
= What = | = What = | ||
RJ45 to minijack converter. With this we can standard network cables to connect eurorack cases. | RJ45 to minijack converter. With this we can standard network cables to connect eurorack cases. | ||
It uses unshielded network cables, 1 pin is used for ground and 7 carry eurorack stuff (triggers/gates/audio) | |||
= Flaws = | |||
It seems to be picking up noise. I think it's the network cable I used for testing, but more testing is needed. Pull down resistors might help for this. | |||
= Files = | |||
* Panel: [[File:Nizl-39-RJ45-Thonkiconn-panel.stl]] | |||
* Schematic: | |||
* Kicad: | |||
= Components = | |||
* 1x RJ45 socket (10 pcs @ https://nl.aliexpress.com/item/4000641016208.html) | |||
* 7x Thonkiconn-style 3,5mm mono jack (200 pcs @ https://nl.aliexpress.com/item/32953299104.html) | |||
Latest revision as of 22:06, 9 September 2022
| RJ45 bridge module for eurorack | |
|---|---|
 | |
| Participants | Dennis |
| Skills | 3D Printing, PCB design, Soldering |
| Status | Done |
| Niche | Music |
| Purpose | Instrument |
| Tool | No |
| Location | |
| Cost | |
| Tool category | |
RJ45 bridge module for eurorack
Nizl-39.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
What
RJ45 to minijack converter. With this we can standard network cables to connect eurorack cases. It uses unshielded network cables, 1 pin is used for ground and 7 carry eurorack stuff (triggers/gates/audio)
Flaws
It seems to be picking up noise. I think it's the network cable I used for testing, but more testing is needed. Pull down resistors might help for this.
Files
- Panel: File:Nizl-39-RJ45-Thonkiconn-panel.stl
- Schematic:
- Kicad:
Components
- 1x RJ45 socket (10 pcs @ https://nl.aliexpress.com/item/4000641016208.html)
- 7x Thonkiconn-style 3,5mm mono jack (200 pcs @ https://nl.aliexpress.com/item/32953299104.html)