CoreAnet

CoreAnet
Participants	User:buzz
Skills	Mechanics, reprap, 3D Printing
Status	Planning
Niche	Hardware
Purpose	Tool
Tool	No
Location
Cost
Tool category

CoreAnet

Coreanet-casetest-forwiki.png {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Parts actually used

Frame

• 14x 30x60mm t-slot extrusion 469mm
• 8x 4020_Extrusion_Cap.stl scaled 150% to 6030 https://www.thingiverse.com/thing:4822278
• 36x 3030_corner_single.stl https://www.thingiverse.com/thing:2503636
• 72x slotnut M4 & M4x10-15 , not sure how long

• Some 1U 19" case for electronics, might change this

Z Axis

• 4x 380mm 8mm smooth rods

• 2x 340mm(??) TR8X8 leadscrews
• 2x flexcouplers (but i guess anything could work)

• 2x Z_Axis_Linear_Rail_Bracket_-_Left.stl https://www.thingiverse.com/thing:3268908
• 2x Z_Axis_Linear_Rail_Bracket_-_Right.stl https://www.thingiverse.com/thing:3268908
• 8x slotnut M4 & M4x10-15 , not sure how long

• 2x Z_Motor_Mount_1.0.stl https://www.thingiverse.com/thing:2254103
• 2x nema17 + some mounting screws
• 8x slotnut M4 & M4-10-15, not sure how long

• 2x Z_Axis_Linear_Rail_Bracket_-_Double_Z_-_Left.stl https://www.thingiverse.com/thing:3268908
• 2x Z_Axis_Linear_Rail_Bracket_-_Double_Z_-_Right.stl https://www.thingiverse.com/thing:3268908
• 8x slotnut M4 & M4x10-15 , not sure how long

XY Framemounted Axis

• 2x 400mm 8mm smooth rod

• 1x XY_Idler_Mount_-_Left_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
• 2x slotnut M4 & M4x10-15 , not sure how long
• 1x M3 about 35mm long?
• some M3 washers to space the bearings
• 4x F605ZZ bearings

• 1x XY_Idler_Mount_-_Right_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
• 2x slotnut M4 & M4x10-15 , not sure how long
• 1x M3 about 35mm long?
• some M3 washers to space the bearings
• 4x F605ZZ bearings

• 1x XY_Stepper_Mount_-_Left_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
• 3x slotnut M4 & M4x10-15 , not sure how long
• 1x nema17 + some mounting screws
• 1x timingbelt pulley + grubscrews

• 1x XY_Stepper_Mount_-_Right_yDia8_-_1.1.stl https://www.thingiverse.com/thing:2254103
• 3x slotnut M4 & M4x10-15 , not sure how long
• 1x nema17 + some mounting screws
• 1x GT2 16? 20? teeth timingbelt pulley + grubscrews

XY Moving Axis

• 2x ??mm 8mm smooth rods

• 2x Y_Carriage_Clamp_LM8UU_1.0.stl https://www.thingiverse.com/thing:2254103
• 2x Y_Carriage_xDia8_LM8UU_1.0.stl https://www.thingiverse.com/thing:2254103
• 8x M3x5x5 knurled brass heat-inserts
• 8x M3x10-maybe12 bolts
• 8x F605ZZ bearings
• some M3 to hold the bearings in place

• 1x X_Carriage_1.0.stl https://www.thingiverse.com/thing:2254103
• 2x LM8LUU bearings
• some M3x5x5 knurled brass heat-inserts
• some M3 bolts to hold stuff

• 4x Belt_Tensioner_1.0.stl https://www.thingiverse.com/thing:2254103
• 2x Belt_Clamp_1.0.stl https://www.thingiverse.com/thing:2254103
• 4x M3 bolts to tension the belts

• 2x long-ass GT2 belts (cut to size but never measured)

Extruder and Hotend and probe and ...

• 1x BMG_Mount_Remixed_keeev.stl https://www.thingiverse.com/thing:3613857
• 2x random 3mm rods i cut to ~12 mm

• 1x clone BMG https://www.tinytronics.nl/shop/en/3d-printing/extrusion/hotends-and-extruders/dual-drive-gear-extruder-1.75mm-bondtech-compatible
• 1x clone E3D https://www.tinytronics.nl/shop/en/3d-printing/extrusion/hotends-and-extruders/hotend-v6-direct-drive-1.75mm-0.4mm-e3d-compatible

• 1x Euclid Probe https://euclidprobe.github.io/
• 1x BLTouch4HypercubeM3Nuts.stl https://github.com/nionio6915/Euclid_Probe/tree/main/stls/Mount%20Adapters/BLTouch

• 1x Duct_klaue_2.stl https://www.thingiverse.com/thing:4462678

Why

Pokon gifted me a Anet A6 to remix. This page documents what i did with it.

What

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

I want to build a corexy printer and reach mad speeds. We have a pile of aluminium extrusion on which i want to base the frame.

Wishes

• do >200mm/s comfortably
• be heavy
• require no parts i do not already have access to failed, i caved
• <10 minute benchy!

Wparts

from anet a6 :

• aluminium heated bed 220x220x3mm
• 12864 lcd and dubious electronics
• T8 leadscrews (2x 318mm) 2x T8x8 nuts
• M8 threaded rods (2x 400mm, 1x 150mm)
• 8MM smooth rods (2x 418mm , 2x 380mm , 2x 340mm)
• ~40 M3x18mm bolts and nuts
• ~15 M4x8mm bolts
• 3x endstop switches with too short wires (but it comes with some 400mm extenders? hmm)
• 4x nema17 motors labelled HEM-17D3003
• 1x extruder , not sure what this is (has two fans , 5150 for partcooling)
• linear bearings , 4x looks like a SC8UU or SCS8UU , 2x LM8LUU , 2x LMH8LUU

alloted :

• 12x 30x60 extrusion 469mm long

still to get a purpose :

• 2x 30x60 extrusion 520mm long
• 4x 30x30 extrusion 500mm long
• 2x 30x30 extrusion 483mm long
• there's also some parts of 2020 extrusion somewhere

bought specifically for it :

• brass heatinserts
• some bearings, belts
• e3d clone lite6
• bmg clone extruder

Winspiration

• https://www.thingiverse.com/thing:1752766 - HyperCube 3D Printer/CNC
• https://www.thingiverse.com/thing:2503636 - The BEST 3030 corners. Single and dual.
• https://www.thingiverse.com/thing:3268908 - Hypercube Evolution Anet A8 Remix
• https://www.thingiverse.com/thing:3613857 - Bondtech BMG Direct for Hypercube Evolution -NO BRASS INSERT-
• https://www.thingiverse.com/thing:2617424 - Hypercube Evolution Complete Hotend Assembly

Work

1. Installed Raspbian https://www.raspberrypi.org/downloads/
2. Installed klipper onto anet electronics and on raspbian https://github.com/KevinOConnor/klipper
3. Added dwc2-for-klipper-socket https://github.com/Stephan3/dwc2-for-klipper-socket
4. Installed rpi_ws281x for the leds https://github.com/jgarff/rpi_ws281x