TheThingsNetwork: Difference between revisions
(→Intro) |
|||
| Line 4: | Line 4: | ||
More info: | More info: | ||
* status on packet broker: https://mapper.packetbroker.net/api/v2/gateways/netID=000013,tenantID=ttn,id=nurdspace-lorix-one | * current status on packet broker: https://mapper.packetbroker.net/api/v2/gateways/netID=000013,tenantID=ttn,id=nurdspace-lorix-one | ||
* https://iot.wifx.net/docs/lorix-os/1.5/wifx-l1/user-s-guide/lorawan/lorawan-networks/the-things-network-industries/the-things-network-v3 | * how to set it upd https://iot.wifx.net/docs/lorix-os/1.5/wifx-l1/user-s-guide/lorawan/lorawan-networks/the-things-network-industries/the-things-network-v3 | ||
Logging in: go to http://lorix-one-0f3a24.local | Logging in: go to http://lorix-one-0f3a24.local | ||
Username: admin, password: <SECRET> | Username: admin, password: <SECRET> | ||
The gateway forwards packets to TheThingsNetwork. Contact [[bertrik]] to become collaborator on TheThingsNetwork dashboard. | |||
At the moment the gateway is fully configured, but off-line, stored in Melan's la. | |||
== Hardware == | == Hardware == | ||
Revision as of 23:34, 21 June 2025
Intro
NurdSpace has a LorixOne LoRaWAN gateway. This page is about setting it up for TheThingsNetwork.
More info:
- current status on packet broker: https://mapper.packetbroker.net/api/v2/gateways/netID=000013,tenantID=ttn,id=nurdspace-lorix-one
- how to set it upd https://iot.wifx.net/docs/lorix-os/1.5/wifx-l1/user-s-guide/lorawan/lorawan-networks/the-things-network-industries/the-things-network-v3
Logging in: go to http://lorix-one-0f3a24.local Username: admin, password: <SECRET>
The gateway forwards packets to TheThingsNetwork. Contact bertrik to become collaborator on TheThingsNetwork dashboard.
At the moment the gateway is fully configured, but off-line, stored in Melan's la.
Hardware
There's a sticker on the outside: FC:C2:3D:0F:3A:24 v1.0d This means it's the 256 MB flash version.
You can screw off the bottom, to reveal an ethernet port and an USB-B port. It gets power from the power-over-ethernet cable.
Software
Configuration
Network connection (easiest)
The thing does DHCP, and is reachable at
lorix-one-0f3a24.local
e.g. http://lorix-one-0f3a24.local for the web interface
Serial connection (fallback)
Connect a USB A-to-B cable to the USB-B port. Open a serial terminal at 115200 bits to /tty/ACM0 (typically)
screen /dev/ttyACM0 115200
Forwarder setup
The gateway was fully re-installed, by flashing an entirely new image. Configuration can be done through the web interface (no CLI required).