TheThingsNetwork: Difference between revisions

From NURDspace
Jump to navigation Jump to search
Line 4: Line 4:


More info:
More info:
* status on packet broker: https://mapper.packetbroker.net/api/v2/gateways/netID=000013,tenantID=ttn,id=nurdspace-lorix-one
* current status on packet broker: https://mapper.packetbroker.net/api/v2/gateways/netID=000013,tenantID=ttn,id=nurdspace-lorix-one
* https://iot.wifx.net/docs/lorix-os/1.5/wifx-l1/user-s-guide/lorawan/lorawan-networks/the-things-network-industries/the-things-network-v3
* how to set it upd https://iot.wifx.net/docs/lorix-os/1.5/wifx-l1/user-s-guide/lorawan/lorawan-networks/the-things-network-industries/the-things-network-v3


Logging in: go to http://lorix-one-0f3a24.local
Logging in: go to http://lorix-one-0f3a24.local
Username: admin, password: <SECRET>
Username: admin, password: <SECRET>
The gateway forwards packets to TheThingsNetwork. Contact [[bertrik]] to become collaborator on TheThingsNetwork dashboard.
At the moment the gateway is fully configured, but off-line, stored in Melan's la.


== Hardware ==
== Hardware ==

Revision as of 23:34, 21 June 2025

Intro

NurdSpace has a LorixOne LoRaWAN gateway. This page is about setting it up for TheThingsNetwork.

More info:

Logging in: go to http://lorix-one-0f3a24.local Username: admin, password: <SECRET>

The gateway forwards packets to TheThingsNetwork. Contact bertrik to become collaborator on TheThingsNetwork dashboard.

At the moment the gateway is fully configured, but off-line, stored in Melan's la.

Hardware

There's a sticker on the outside: FC:C2:3D:0F:3A:24 v1.0d This means it's the 256 MB flash version.

You can screw off the bottom, to reveal an ethernet port and an USB-B port. It gets power from the power-over-ethernet cable.

Software

Configuration

Network connection (easiest)

The thing does DHCP, and is reachable at

 lorix-one-0f3a24.local

e.g. http://lorix-one-0f3a24.local for the web interface

Serial connection (fallback)

Connect a USB A-to-B cable to the USB-B port. Open a serial terminal at 115200 bits to /tty/ACM0 (typically)

 screen /dev/ttyACM0 115200

Forwarder setup

The gateway was fully re-installed, by flashing an entirely new image. Configuration can be done through the web interface (no CLI required).