| Line 15: | Line 15: | ||
I used the debian squeese installer for this. Steps: | I used the debian squeese installer for this. Steps: | ||
* Go trough the installer to the point where it detects (and can't find) disks | * Go trough the installer to the point where it detects (and can't find) disks | ||
* Unload en load modules | * Unload en load modules | ||
<code> | |||
modprobe -r ata_generic<br> | |||
modprobe -r pata_amd<br> | |||
modprobe ata_generic all_generic_ide=1 | |||
</code> | |||
* wget http://downloads.openwrt.org/attitude_adjustment/12.09/x86/generic/openwrt-x86-generic-combined-squashfs.img or bake your own image | * wget http://downloads.openwrt.org/attitude_adjustment/12.09/x86/generic/openwrt-x86-generic-combined-squashfs.img or bake your own image | ||
* dd it to /dev/sda | * dd it to /dev/sda | ||
==Running OpenWRT== | ==Running OpenWRT== | ||
At this point the kernel boots but I don't get a login screen. Network is disabled too. | At this point the kernel boots but I don't get a login screen. Network is disabled too. | ||
===Todo=== | ===Todo=== | ||
* Check serial console | * Check serial console | ||
Revision as of 16:03, 22 June 2013
What is this?
Some notes on Wyse S90. The Wyse SX0 series are all very much alike and behave strangely.
Links
- http://fijam.eu.org/blog/running-linux-on-wyse-s30/ (especially useful is the part about unloading and loading IDE modules)
- http://www.parkytowers.me.uk/thin/wyse/s10/Linux.shtml
Findings
- Debian wheezy installer from HARKboot doesn't work, squeeze does!
BIOS
- Enter with "DEL"
- Default pass is "Fireport"
OpenWRT installation
I used the debian squeese installer for this. Steps:
- Go trough the installer to the point where it detects (and can't find) disks
- Unload en load modules
modprobe -r ata_generic
modprobe -r pata_amd
modprobe ata_generic all_generic_ide=1
- wget http://downloads.openwrt.org/attitude_adjustment/12.09/x86/generic/openwrt-x86-generic-combined-squashfs.img or bake your own image
- dd it to /dev/sda
Running OpenWRT
At this point the kernel boots but I don't get a login screen. Network is disabled too.
Todo
- Check serial console