(→Todo) |
|||
| Line 21: | Line 21: | ||
* <s>Wood</s> | * <s>Wood</s> | ||
* <s>USB Microscope</s> | * <s>USB Microscope</s> | ||
* Tubing | * <s>Tubing</s> | ||
* Footswitch | * <s>Footswitch</s> | ||
* <s>Airpump</s> | * <s>Airpump</s> | ||
* <s>Pickup tool</s> | * <s>Pickup tool</s> | ||
* <s>Bearings</s> | * <s>Bearings</s> | ||
* <s>Misc</s> | * <s>Misc</s> | ||
* Z-axis linear bearing | * <s>Z-axis linear bearing</s> | ||
== Todo == | == Todo == | ||
Revision as of 12:38, 20 April 2015
| Manual PNP machine | |
|---|---|
 | |
| Participants | |
| Skills | Wood working, assembling |
| Status | Active |
| Niche | Electronics |
| Purpose | Use in other project |
| Tool | Yes |
| Location | |
| Cost | 100 |
| Tool category | Electronics |
PNP_3.jpg {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::100 | }}
Overview
In order to buils some other stuff, like the NURDled and the CC2850 zigbee modules, we need a more ergonomic method to populate the boards rather than manually populate them with a pair of tweasers. So I'm building a crude, but handy manual PNP machine
Stuff needed
WoodUSB MicroscopeTubingFootswitchAirpumpPickup toolBearingsMiscZ-axis linear bearing
Todo
Get tubingConvert airpump to vacuumpumpAssemble X-axisAssemble Y-axisAssemble Z-axisMount USB microscopeAssemble vaccuum assembly- Nurdify
Pics
Base without gantry
The bearings for the X-axis
Now with gantry
Y-axis added
Close-up of Y-axis bearings
Screenshot of USB uScope while watching a mobo
USB uScope mounted, hovering over said mobo
