Latest revision as of 13:48, 17 September 2023

SpaceModular

Owner	Space
Status	Usable
Location	Studio
Tool	Yes
Tool category	Music production

SpaceModular

SpaceModular2.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Studio

What

Eurorack modular synthesizer. We have a 3U 19" case in which we can experiment and play with eurorack synth modules. The back also has rails.We will put in sliding nuts so we can put modules in the back as well, might be nice for 2 person patching madness.

For now: Bring your own patch cables (mono 3.5mm mini jack)

Powah

USBPowerThingy

Our modules are powered by a USBPowerThingy. This is a USB powered busboard with 6 connectors (3x 10 pins and 3x 16 pins). When we run out of space or juice, we can look for another solution. The board is mounted, the location and manner is not ideal, but for now it'll do.

⚠Output current ⚠

Please note the maximum output currents: +12V 700mA and -12V 150mA .5V is coming directly from the USB adapter, so this is whatever it can muster minus current used for the +-12V.

Modules

Progress \o/

Bomono CV Twister/Wave Warper
Doepfer A-190-2 MIDI to cv (Seems to work but MIDI connector is corroded, should be changed)
Skull & Circuits Fuzz-1 - The Leech (Owned by The_Niz)
Ginkosynthese Grains running Talko/Mario greeter (Owned by The_Niz)
2x Blinkenlights Vactrol drum, not working properly but doing SomeThing (Tm). Maybe they just need calibrating. (Owned by The_Niz)
RJ45 bridge

Supplies

There's a little box with screws and washers and it will contain more ribbon cables in the future.

Todo

Add sliding nuts to back side for more modules
Add better PSU, possibly using the 230V connector on the back and switch on the front (USB brick inside the rack?)
Put a top cover on the rack
Get more patch cables

@@ Line 9: / Line 9: @@
 }}
 = What =
-Eurorack modular synthesizer. We have a 3U 19" case in which we want to experiment  and play with eurorack synth modules.
+Eurorack modular synthesizer. We have a 3U 19" case in which we can experiment and play with eurorack synth modules.
+The back also has rails.We will put in sliding nuts so we can put modules in the back as well, might be nice for 2 person patching madness.
+For now: '''Bring your own patch cables (mono 3.5mm mini jack)'''
 = Powah =
-For now we will start with a [https://modularaddict.com/manufacturer/timo-rozendal/timo-usbpowerthingy-pcb USBPowerThingy]. This is a USB powered busboard with 6 connectors (3x 10 pins and 3x 16 pins). When we run out of space or juice, we can look for another solution.
+== USBPowerThingy ==
-The board is mounted, but the location and manner is not ideal, but for now it'll do.
+Our modules are powered by a [https://modularaddict.com/usbpowerthingy-eurorack-usb-power-supply-pcb-timo-rozendal USBPowerThingy]. This is a USB powered busboard with 6 connectors (3x 10 pins and 3x 16 pins). When we run out of space or juice, we can look for another solution.
+The board is mounted, the location and manner is not ideal, but for now it'll do.
+=== ⚠Output current ⚠===
+Please note the maximum output currents: +12V 700mA and -12V 150mA .5V is coming directly from the USB adapter, so this is whatever it can muster minus current used for the +-12V.
 <gallery>
 USBPowerThingie_mounted.jpg
 </gallery>
 = Modules =
 Progress \o/
@@ Line 21: / Line 28: @@
 SpaceModularEmpty.jpg
 SpaceModular2.jpg
+SpaceModular3.jpg
+SpaceModular4.jpg
 </gallery>
-* [https://www.modulargrid.net/e/other-unknown-cv-twister-wave-warper CV Twister/Wave Warper]
+* [https://www.modulargrid.net/e/other-unknown-cv-twister-wave-warper Bomono CV Twister/Wave Warper]
-* [http://www.doepfer.de/a1902.htm Doepfer A-190-2 MIDI to cv (possibly broken)]
+* [http://www.doepfer.de/a1902.htm Doepfer A-190-2 MIDI to cv] (Seems to work but MIDI connector is corroded, should be changed)
+* [https://www.skullandcircuits.com/fuzz-1/ Skull & Circuits Fuzz-1 - The Leech] (Owned by The_Niz)
+* [https://www.modulargrid.net/e/ginko-synthese-grains-new-panel Ginkosynthese Grains] running [https://github.com/Nizzle/grains-talko-greeter Talko/Mario greeter] (Owned by The_Niz)
+* 2x [https://www.modulargrid.net/e/other-unknown-blinkenlights-vactrol-drum Blinkenlights Vactrol drum], not working properly but doing SomeThing (Tm). Maybe they just need calibrating. (Owned by The_Niz)
+* [[RJ45 bridge module for eurorack|RJ45 bridge]]
 = Supplies =
-There's a little box with screws and washers and it will contain more ribbon cables in the future
+There's a little box with screws and washers and it will contain more ribbon cables in the future.
+<gallery>
+SpaceModularSupplies.jpg
+SpaceModularSuppliesContents.jpg
+</gallery>
 = Todo =
-* Design and print a mount for the USBPowerThingy
+* Add sliding nuts to back side for more modules
-* Wait for ordered ribbon cables (3 times 10 pins on both sides) and put them in the USBPowerThingy
+* Add [https://www.tindie.com/products/Sourcery/-12v-and-5v-powersupply-for-eurorack/ better PSU], possibly using the 230V connector on the back and switch on the front (USB brick inside the rack?)
-* Better solution for power, possibly using the 230V connector on the back and switch on the front (USB brick inside the rack?)
+* Put a top cover on the rack
-* Maybe a better USB brick, the one we use now is 1A
+* Get more patch cables
-* Maybe put a top cover on the rack