Turnigy Mini Fabrikator II: Difference between revisions

Latest revision as of 02:45, 8 December 2021

Turnigy Mini Fabrikator II

Participants
Skills	knowledge sharing, link gathering
Status	Production
Niche	Printing
Purpose	Tool
Tool	No
Location
Cost
Tool category

Turnigy Mini Fabrikator II

Minifabv2.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

http://malyansys.com/en/

This printer is made by Malyan as the M100 model. Not many shops sell it, but hobbyking sells them rebranded :

https://hobbyking.com/en_us/fabrikator-mini-ii-silver-m100.html?___store=en_us

Some configs and tools

Updated profile 2020

This profile is set to 100% fill and 2 perimeter walls, just variate on that for lesser filled objects. (for example; 4 perimeters and 0% fill work nice for many sculptures)

http://space.nurdspace.nl/~buzz/newsolidobject.profile.gz

Magic Layer Heights

Slicing on these layerheights greatly improves quality:

0.0875
0.13125
0.175
0.21875 (my new default)
0.2625
0.30625

Replacement parts

My X belt snapped so i just ordered two new closed loops. I was hoping to use a open ended belt, but seems not fitting.
Both the X and Y belt are B150MXL aka 1200MXL , ~5mm wide so 1200MXL-019.

https://www.atd.nl/tandriem-neopreen-1200-p-31417.html

Many of the parts for a Malyan M200 (aka Monoprice Mini Select (v1/2/3)) are compatible.

Nanopi stuffed inside

Finally stuffed the nanopi that i run octoprint on inside the frame:

Some more links

https://www.3d-druck-community.de/showthread.php?tid=17492

@@ Line 2: / Line 2: @@
 |Name=Turnigy Mini Fabrikator II
 |Skills=knowledge sharing, link gathering,
-|Status=Active
+|Status=Production
 |Niche=Printing
 |Purpose=Tool
+|Picture=Minifabv2.jpg
 |Tool=No
 }}
 * http://malyansys.com/en/
@@ Line 15: / Line 15: @@
-Some configs and tools;
+===Some configs and tools===
 * http://space.nurdspace.nl/~buzz/cura1504-minifabv2-profiles.tgz
 * http://space.nurdspace.nl/~buzz/cura_15.04.7-RC5-debian_amd64.deb
+===Updated profile 2020===
+This profile is set to 100% fill and 2 perimeter walls, just variate on that for lesser filled objects. (for example; 4 perimeters and 0% fill work nice for many sculptures)
+* http://space.nurdspace.nl/~buzz/newsolidobject.profile.gz
+===Magic Layer Heights===
+Slicing on these layerheights greatly improves quality:
+* 0.0875
+* 0.13125
+* 0.175
+* 0.21875 (my new default)
+* 0.2625
+* 0.30625
+===Replacement parts===
+My X belt snapped so i just ordered two new closed loops. I was hoping to use a open ended belt, but seems not fitting.<br>
+Both the X and Y belt are B150MXL aka 1200MXL , ~5mm wide so 1200MXL-019.
+* https://www.atd.nl/tandriem-neopreen-1200-p-31417.html
+Many of the parts for a Malyan M200 (aka Monoprice Mini Select (v1/2/3)) are compatible.
+===Nanopi stuffed inside===
+Finally stuffed the nanopi that i run octoprint on inside the frame:
+<gallery>
+Fabrikator-Nanopimod-Frontview.jpg
+Fabrikator-Nanopimod-Topview.jpg
+</gallery>
+===Some more links===
+* https://www.3d-druck-community.de/showthread.php?tid=17492