(→Todo) |
|||
| Line 31: | Line 31: | ||
= Todo = | = Todo = | ||
* Design and print a mount for the USBPowerThingy | * Design and print a mount for the USBPowerThingy | ||
* Better solution for power, possibly using the 230V connector on the back and switch on the front (USB brick inside the rack?) | * Better solution for power, possibly using the 230V connector on the back and switch on the front (USB brick inside the rack?) | ||
* Maybe a better USB brick, the one we use now is 1A | * Maybe a better USB brick, the one we use now is 1A | ||
* Maybe put a top cover on the rack | * Maybe put a top cover on the rack | ||
Revision as of 16:37, 14 June 2020
| SpaceModular | |
|---|---|
 | |
| Owner | Space |
| Status | Usable |
| Location | Studio |
| Tool | Yes |
| Tool category | Music production |
SpaceModular2.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Studio
What
Eurorack modular synthesizer. We have a 3U 19" case in which we can experiment and play with eurorack synth modules. The back also has rails. If we put in threaded inserts we could put modules in the back as well, might be nice for 2 person patching madness.
Powah
For now we will start with a USBPowerThingy. This is a USB powered busboard with 6 connectors (3x 10 pins and 3x 16 pins). When we run out of space or juice, we can look for another solution. The board is mounted, but the location and manner is not ideal, but for now it'll do.
Modules
Progress \o/
- Bomono CV Twister/Wave Warper
- Doepfer A-190-2 MIDI to cv (possibly broken)
- Skull & Circuits Fuzz-1 - The Leech (Owned by The_Niz)
Supplies
There's a little box with screws and washers and it will contain more ribbon cables in the future
Todo
- Design and print a mount for the USBPowerThingy
- Better solution for power, possibly using the 230V connector on the back and switch on the front (USB brick inside the rack?)
- Maybe a better USB brick, the one we use now is 1A
- Maybe put a top cover on the rack