(→Pics) |
(→Todo) |
||
| Line 30: | Line 30: | ||
== Todo == | == Todo == | ||
* Get tubing | * <s>Get tubing</s> | ||
* <s>Convert airpump to vacuumpump</s> | * <s>Convert airpump to vacuumpump</s> | ||
* <s>Assemble X-axis</s> | * <s>Assemble X-axis</s> | ||
* <s>Assemble Y-axis</s> | * <s>Assemble Y-axis</s> | ||
* Assemble Z-axis | * <s>Assemble Z-axis</s> | ||
* <s>Mount USB microscope</s> | * <s>Mount USB microscope</s> | ||
* Assemble vaccuum assembly | * <s>Assemble vaccuum assembly</s> | ||
* Nurdify | * Nurdify | ||
Revision as of 12:38, 20 April 2015
| Manual PNP machine | |
|---|---|
 | |
| Participants | |
| Skills | Wood working, assembling |
| Status | Active |
| Niche | Electronics |
| Purpose | Use in other project |
| Tool | Yes |
| Location | |
| Cost | 100 |
| Tool category | Electronics |
PNP_3.jpg {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::100 | }}
Overview
In order to buils some other stuff, like the NURDled and the CC2850 zigbee modules, we need a more ergonomic method to populate the boards rather than manually populate them with a pair of tweasers. So I'm building a crude, but handy manual PNP machine
Stuff needed
WoodUSB Microscope- Tubing
- Footswitch
AirpumpPickup toolBearingsMisc- Z-axis linear bearing
Todo
Get tubingConvert airpump to vacuumpumpAssemble X-axisAssemble Y-axisAssemble Z-axisMount USB microscopeAssemble vaccuum assembly- Nurdify
Pics
Base without gantry
The bearings for the X-axis
Now with gantry
Y-axis added
Close-up of Y-axis bearings
Screenshot of USB uScope while watching a mobo
USB uScope mounted, hovering over said mobo
