Maxidome

Maxidome
Participants
Skills	construction, grinding, drilling
Status	Active
Niche	Mechanics
Purpose	Infrastructure
Tool	No
Location
Cost
Tool category

Maxidome Property "Tool Image" (as page type) with input value "File:" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.

{{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost:: | }}

Construction

Tubing

• 30 x 'S' : 1.57m x 22mm steel
• 40 x 'M' : 1.82m x 22mm steel
• 50 x 'L' : 1.86m x 22mm steel

Hubs

46x 40mm steel ring 25 x 6-way rings 6 x 5-way rings 15 x 4-way rings

Design decisions

• The dome will be 9m in diameter
• The tubes will be 22m steel tubes
• The inner ring of the hub will be a 40mm external diameter steel ring, with a height of 25 mm.
• The outer ring of the hub will be a 75mm external diameter PVC ring, with a height of 50mm.
• Both ends of a steel pipe will be equipped with a 8mm hole, with it's centerpoint located 8mm from the edge.
• The outer hub will be equipped with 24mm holes.

• Acquire missing tools needed
• Settle on size
• Settle on tube diameter
• Settle on hub design
• Determine total length of tubing required
• Find supply of steel tubing
• Design hubcap
• Print hubcaps
• Purchase tubes
• Select zipties
• Purchase zipties
• Cut tubes to required lengths
• Drill tube ends so zipties can be fitted
• Create assembly plan
• Assemble in back yard