No edit summary |
mNo edit summary |
||
| Line 29: | Line 29: | ||
</pre> | </pre> | ||
After a reboot I could select this as default audio output in OSMC \o. | After a reboot I could select this as default audio output in OSMC \o. | ||
= Todo = | |||
* Measure power consumption | |||
* If needed, find a way to switch AMP on/off from the Pi | |||
* Check if there is space in the Aristona and decide on how and where to mount the Pi and HAT. | |||
* Decide on speakers. | |||
Revision as of 20:33, 4 August 2017
| PiRistona SA5026A | |
|---|---|
 | |
| Participants | Dennis |
| Skills | Linux |
| Status | Active |
| Niche | Music |
| Purpose | |
| Tool | No |
| Location | Niz |
| Cost | |
| Tool category | |
AristonaSA5026A.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
What
I've acquired a beautiful antique Aristona SA5026A. Plan is to make a nice music player out of it using a Raspberry Pi B+ and a Suptronics X400 AMP/DAC HAT.
Software
WiP
Rune Audio
Tried v0.3-beta (29/10/2014), could not get it stable. It consistently threw kernel panics when rebooting, and the WebUI kept crashing.
Volumio
Tried volumio-2.246-2017-07-31-pi.img. After first boot you should wait while a lot of stuff is happening, like partition resizing. If you reboot it to soon you'll end up with a non working system. Got DAC working from within the WebUI:
- Go to Menu
- Choose Playback Opions
- Enable I2S DAC
- Choose IQaudIO Pi-DigiAMP+
- Save and reboot
OSMC
Got DAC working, needed two lines in /boot/config.txt:
dtparam=i2s=on dtoverlay=iqaudio-dacplus
After a reboot I could select this as default audio output in OSMC \o.
Todo
- Measure power consumption
- If needed, find a way to switch AMP on/off from the Pi
- Check if there is space in the Aristona and decide on how and where to mount the Pi and HAT.
- Decide on speakers.