Line 12: | Line 12: | ||
== Serial output == | == Serial output == | ||
* Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None. | * Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None. | ||
<code> | |||
FGT50B (14:15-10.01.2008) | |||
Ver:04000010 | |||
Serial number:FGT50B3G10635232 | |||
RAM activation | |||
Total RAM: 256MB | |||
Enabling cache...Done. | |||
Scanning PCI bus...Done. | |||
Allocating PCI resources...Done. | |||
Enabling PCI resources...Done. | |||
Zeroing IRQ settings...Done. | |||
Verifying PIRQ tables...Done. | |||
Enabling Interrupts...Done. | |||
Boot up, boot device capacity: 64MB. | |||
Press any key to display configuration menu... | |||
...... | |||
</code> | |||
<code> | <code> | ||
Line 35: | Line 53: | ||
</code> | </code> | ||
After this, the unit resets and the | After this, the unit resets and reading of the boot image starts all over |
Revision as of 01:40, 22 July 2012
NURDs Inventory | |
---|---|
Owner | The wikipage input value is empty (e.g. <code>SomeProperty::, [[]]</code>) and therefore it cannot be used as a name or as part of a query condition. |
Status | |
Tool | |
Tool category |
{{{Name}}}Property "Tool Name" (as page type) with input value "{{{Name}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} Prof_Zonnebloem {{{Location}}}Property "Tool Location" (as page type) with input value "{{{Location}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.
AMD Geode (x86 \o/) based Firewall. Socketed PLCC32 BIOS chip and soldered flash chip. The unit runs FortiOS (this is linux, according to gpl-violations.org. There's loads of info on the manufacturer's site including a 934 pages long CLI reference.
Serial output
- Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.
FGT50B (14:15-10.01.2008)
Ver:04000010
Serial number:FGT50B3G10635232
RAM activation
Total RAM: 256MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Press any key to display configuration menu...
......
Reading boot image 1304065 bytes.
Initializing firewall...crc errorINITTAR: falling back to normal initrd...
crc errorFAT: bogus logical sector size 0
Kernel panic: VFS: Unable to mount root fs on 01:00
FGT50B (14:15-10.01.2008)
Ver:04000010
Serial number:FGT50B3G10635232
RAM activation
Total RAM: 256MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Press any key to display configuration menu...
......
After this, the unit resets and reading of the boot image starts all over