Fortinet Fortigate-50B Firewall

NURDs Inventory
Owner	The wikipage input value is empty (e.g. <code>SomeProperty::, [[]]</code>) and therefore it cannot be used as a name or as part of a query condition.
Status
Tool
Tool category

{{{Name}}}Property "Tool Name" (as page type) with input value "{{{Name}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} Prof_Zonnebloem {{{Location}}}Property "Tool Location" (as page type) with input value "{{{Location}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.

AMD Geode (x86 \o/) based Firewall. Socketed PLCC32 BIOS chip and soldered flash chip. The unit runs FortiOS (this is linux, according to gpl-violations.org. There's loads of info on the manufacturer's site including a 934 pages long CLI reference.

• 

  Internals

• 

  Connectors

• 

  Bottom

Serial output

• Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.

FGT50B (14:15-10.01.2008)                                                                  
Ver:04000010                                                                               
Serial number:FGT50B3G10635232                                                             
RAM activation
Total RAM: 256MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Press any key to display configuration menu...
......

When you press a key you get:

..
[G]:  Get firmware image from TFTP server.
[F]:  Format boot device.
[I]:  Configuration and information.
[Q]:  Quit menu and continue to boot with default firmware.
[H]:  Display this list of options.

When you don't press a key, it continues with:

Reading boot image 1304065 bytes.
Initializing firewall...crc errorINITTAR: falling back to normal initrd...
crc errorFAT: bogus logical sector size 0
Kernel panic: VFS: Unable to mount root fs on 01:00
FGT50B (14:15-10.01.2008)
Ver:04000010
Serial number:FGT50B3G10635232
RAM activation
Total RAM: 256MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: 64MB.
Press any key to display configuration menu...
......

After this, the unit resets and reading of the boot image starts all over