3D-Print Farm: Difference between revisions

From NURDspace
Jump to navigation Jump to search
(Replaced content with "{{Project |Name=3D-Print Farm |Status=Operational |Niche=3D Printing |Purpose=Reliable fabrication |Picture=3d-Print Farm.jpeg |Tool=Yes |Location=3D-Corner |Category=Fabrication }} We try to keep an array of working printers connected to this server. Current working printers: * Ultimaker Original modified Direct Drive(1.75mm) You can get the Prusaslicer config here: [https://cloud.nurd.space/f/1300185 UMO+DD_Prusaslicer_config.ini] Upload your gcode via network...")
Tag: Replaced
No edit summary
 
Line 19: Line 19:


Upload your gcode via network or USB disk.  
Upload your gcode via network or USB disk.  
Some suggestions:
* please don't use old (and thus brittle) filament
* use hairspray on the buildplate as needed
* check leveling of buildplate for proper adhesion
* remove filament immediately after printing to avoid breakage of filament in the extruder
 


For support/assistance contact berend.
For support/assistance contact berend.

Latest revision as of 00:41, 23 April 2026

3D-Print Farm
3d-Print Farm.jpeg
Participants
Skills
Status Operational
Niche 3D Printing
Purpose Reliable fabrication
Tool Yes
Location 3D-Corner
Cost
Tool category Fabrication

3D-Print Farm

3d-Print Farm.jpeg {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::{{{Cost}}} | }}


We try to keep an array of working printers connected to this server.

Current working printers:

  • Ultimaker Original modified Direct Drive(1.75mm)

You can get the Prusaslicer config here: UMO+DD_Prusaslicer_config.ini

Upload your gcode via network or USB disk.

Some suggestions:

  • please don't use old (and thus brittle) filament
  • use hairspray on the buildplate as needed
  • check leveling of buildplate for proper adhesion
  • remove filament immediately after printing to avoid breakage of filament in the extruder


For support/assistance contact berend.