Eurocrack opamp

From NURDspace

Revision as of 22:35, 15 July 2022 by Flok (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Testing of opamps for Eurocrack module

see Nurdspace eurorack raspberry pi hat

method of testing

sine wave from Doeper A-147 VCLFO module

schematic for +/-5V to 3.3V in breadboard

most opamps were tested with a 33k resistor from output to inverting input of the opamp. the best opamp was also tried with 30k ohm.

most opamps showed clipping

TL072

datasheet: https://www.ti.com/product/TL072

LM358P

datasheet: https://www.ti.com/lit/ds/symlink/lm358b.pdf?ts=1657890916144

MCP6002

datasheet: https://cdn-shop.adafruit.com/datasheets/MCP3008.pdf

Also tried with 30k resistor as with 33k, the ADC used (MCP3008) clipped too much:

Retrieved from "https://nurdspace.nl/index.php?title=Eurocrack_opamp&oldid=12064"