Dell PowerEdge 2950 confusion

Dell PowerEdge 2950 confusion

Owner	Space
Status	Working
Hostname	confusion
Location	Server room
Tool	No
Tool category

Confusion.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Server room

Specs

24GB fully buffered DDR2 (4x4GB and 4x2GB) Max is 32GB or 64GB for gen III
iDRAC @ [1]
CPU 2x X5450 Xeon 3GHz (4 cores each)
HDDs SAS 3x146GB and 3x73GB (264GB logical drive in OS)
2 onboard network ports and 2x2 ports on cards. First port of one of the cards is currently connected (eth3).

The owners manual

OS

Proxmox 4, management on [2]

Network Layout

nurds-sw-04 port 12 set up to accept VLAN tagged packets.
eth2 connected to sw-04 port 23 from upper NIC
eth3 connected to sw-08 port 24 from lower NIC
eth4 connected to sw-08 port 22 from lower NIC
eth5 connected to sw-04 port 12 from upper NIC
bond0 set up but doing nothing on eth[0,1]
bond1 set active-backup on eth[4,2] (cross-card, primary upper)
bond2 set active-backup on eth[3,5] (cross-card, primary lower)
vmbr0 providing management console on VLAN1, bridging bond2 interface. This is for the NFS connections to the storage.
vmbr7 connected to VLAN7, bridging bond1.7 interface (i.e. tagging packets as VLAN7).
vmbr8 connected to VLAN8, bridging bond1.8 interface (i.e. tagging packets as VLAN8).
vmbr7 and vmbr8 available for VM/container binding, with no management interface connection.

Issues

Wake on LAN on connected NIC does't seem to work. I could not find the appropriate option in the BIOS
Console redirection in DRAC interface won't work with tried browsers and java

Todo

DRAC email alerts
Logins through LDAP

Migrations

As per https://pve.proxmox.com/wiki/Convert_OpenVZ_to_LXC , migration of most of the containers is riduclously easy:

On precious:

vzctl stop NUM
vzdump NUM -dumpdir /mnt/pve/dumpster-a-vm/dump/

On confusion

pct restore NUM /mnt/pve/dumpster-a-vm/dump/vzdump-openvz-NUM*.tar -storage dumpster-b-vm
pct set NUM -net0 name=eth0,bridge=vmbr7

On a few machines with static IP's, the IP can be entered in the main webconsole.

When sid's been used, proxmox doesn't like it much, so it needs to be switched to 'unmanaged' ostype, e,g,:

pct restore NUM /mnt/pve/dumpster-a-vm/dump/vzdump-openvz-NUM*.tar -storage dumpster-b-vm -ostype unmanaged