MIDI Synths and Arduinos

MIDI, Synths and Arduinos

Participants	Dennis
Skills
Status	Active
Niche	Electronics
Purpose	Use in other project
Tool	No
Location
Cost
Tool category

MIDI, Synths and Arduinos

MIDI connectors1.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

What

I've got some Arduino Pro Mini's and some DIN5 connectors from Adafruit, so let's do something with it. Yay MIDI \o/. Some ideas:

MIDI enabled synth

MIDI in

Read the notes that are being transmitted from a keyboard or sequencer. Information about velocity and pitch bend would also be nice.

Sound output

Multiple possibilities here:

Arduino as synth

The Arduino is capable of producing sound on its own, so write/borrow some code and connect a jack connector to the Arduino and we're done.

Driving the Korg Monotron

I own a Korg Monotron and supposedly they are very easy to modify. It would be awesome to be able to play it with a decent keyboard.

Drive a sound chip

555

Datasheet: http://www.alldatasheet.net/datasheet-pdf/pdf/161277/TI/NE555P.html
Example synth: http://blog.makezine.com/2008/12/16/simple-diy-555-synth/

Yamaha OPL2 / OPL3

MIDI player / sequencer

Start with implementing MIDI out and go from there.

Opto-isolation

It is good practice and part of the MIDI spec to use opto-isolation for MIDI in only. I've seen examples without it, but I'm not taking any chances when it comes to connecting to other MIDI hardware. I've found a MCT2E optocoupler which seems suitable.