| LongboardMod | |
|---|---|
 | |
| Participants | User:buzz |
| Skills | Mechanics |
| Status | Planning |
| Niche | |
| Purpose | Transportation |
| Tool | No |
| Location | |
| Cost | |
| Tool category | |
Fallenskateboarder.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost:: | }}
Buildlog
So, i've started a buildlog here to keep track of order etc.
Mounted the pulley today, and, as i suspected i need longer M5 bolts. About 70mm should do. So, need to grab some of those soon.
Looks and feels proper enough, so will be ordering a HTD belt soon. Need to find a 280/290 5M 15MM HTD belt, any leads? :)
Also, remember to grab this for front pulley; http://www.thingiverse.com/thing:16627
Just some links
- http://endless-sphere.com/forums/viewtopic.php?f=35&t=54963&p=831538#p831538
- http://endless-sphere.com/forums/viewtopic.php?f=35&t=53506&
- https://i.imgur.com/FJSRYlp.jpg
- http://i.materialise.com/shop/item/247a7827-e1ab-484e-97aa-a6f7fb197a5e
- http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=28223&aff=877196
- https://www.aliendrivesystems.com/store/p10/Abec_11_Flywheel_Hub_drive_adaptor.html
Calc center distance of pulleys:
Came to about 5.5 to 7.5cm distance, will need to redo when i know actual belt size etc
Printable???
- http://www.thingiverse.com/thing:545345/
- http://www.thingiverse.com/thing:249733/
- http://www.thingiverse.com/thing:565583/
- http://endless-sphere.com/forums/viewtopic.php?f=35&t=64466&p=966338#p966338
- http://endless-sphere.com/forums/viewtopic.php?f=35&t=64708#p971513
Let's try this :)
Blurb
~going to use:
- HTD 5mm belt
- 15/44 pulleys
- 90mm
- >60A esc (hooked to arduino)
- 5055 280kv motor
- 6S battery config (probably in 3/4Ah packages)
- wireless nunchuck (hooked to arduino)
- some kind of lights (hooked to arduino)