| SlabPi | |
|---|---|
 | |
| Owner | Invict |
| Status | Infrastructure |
| Location | Behind the printer |
| Tool | No |
| Tool category | |
Slabpi.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Behind the printer
SlabPi is the replacement for Slab on a Raspberry Pi 3. It has been moved, because of downscaling.
It runs the MPD Server, espeak and it has a SenseHAT for measuring temperature, humidity and atmospheric pressure on Raspbian.
RAM increased with zram. Tutorial here: https://www.novaspirit.com/2016/12/24/increasing-ram-raspberry-pi/
MPD
Fixed an issue where MPD hangs on song change. Fix it by uncommenting "device" option in the "audio_output" block (in my case ALSA) in mpd.conf. This is a common error.
Connection through client.
Host: slabpi.dhcp.nurd.space
Port: 6600
SenseHAT
The measurements are locally readable on a Node-RED dashboard here. http://slabpi.dhcp.nurd.space:1880/ui/#/0 and public on https://metrics.nurd.space/dashboard/db/space-dash?refresh=1m&orgId=1
Eco button as mpd skip button
We have this cute usb Eco Button lying around, which is meant to put your computer in sleep mode in order to save energy. It would be nice if we could use it as an mpd next button.
Button gets recognized as shown in dmesg:
[ 1856.485618] hid-generic 0003:0C50:1010.0003: hiddev0,hidraw0: USB HID v1.10 Device [One small click One big change One small click One big change] on usb-0000:00:1d.1-2/input0
After reading [1] I was hoping this would be easy, but it seems this particular button does not generate keypresses in X.
So over to [2], and more info on [3]. Got an error similar to [4]. After editing hid.c it compiles.
And it does stuff too \o/:
dell@zeekoe:~/nizzle/hid_mapper$ sudo ./hid_mapper --learn --manufacturer 'One small click One big change' --product 'One small click One big change' --map Found HID device Opened HID interface on /dev/hidraw0 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8 02 80 24 08 36 20 08 88 02 19 01 8f 92 11 00 a8
So it seems that after the button is pressed, a sequence of two events is repeated X times (seems to depend on how long button is pressed). I'm having trouble feeding it the correct map file. With a map file like this:
0219018f921100a80280240836200888:KEY_UP
or this:
0219018f921100a8:KEY_DOWN 0280240836200888:KEY_UP
it spits out this error:
dell@zeekoe:~/nizzle/hid_mapper$ sudo ./hid_mapper --manufacturer 'One small click One big change' --product 'One small click One big change' --map 'eco.map' Loading eco.map Error loading map file eco.map [ MapReader ] Unknown key name at line 1
espeak
Possible solution for current espeak problem here. https://raspberrypi.stackexchange.com/questions/3412/errors-with-espeak
WiP
To do:
- Sensor measurement implementation on Nurdbot
- espeak usage generates an error.
- SenseHAT died. Check on what's up.
- SenseHAT is now directly above the Raspberry Pi 3 board, need to connect a 40 pin cable for better temperature measurement