Layer 2 overview

Below you can find the structure of the network as of 10-04-2022. Fat lines are LACP trunks

Layer 3 overview

we have a single-vlan flat network. Due to legacy, three different prefixes live on this vlan:

10.208.11.0/24 (gateway 10.208.11.1)
10.208.30.0/24 (gateway 10.208.30.1)
10.208.42.0/23 (gateway 10.208.42.1)

IP addresses

10.208.30.0/24 is used for static allocations. Register your ip's in IPAM.
10.208.42.0/23 is used for dynamic allocations using DHCP

DNS

search nurd.space lan.nurd.space vm.nurd.space management.nurd.space router.nurd.space dhcp.nurd.space
nameserver 10.208.30.254

Layer 3 simplification

In order to reduce the unnescecary roundtips via the edgerouter, we need to flatten the networks into a single prefix. The proposal for this is to move to 10.208.28.0/22. This prefix would be used as follows (With the gateway living on 10.208.30.1):

10.208.28.1 .. 10.208.29.255 DHCP
10.208.30.1 .. 10.208.30.255 Static clients
10.208.31.0 .. 10.208.30.254 reserved

Management URLs

You can manage our devices using the URLs below:

Product	URL	User	Used for	Notes
Edgerouter Lite	https://gateway.lan.nurd.space:8443/	ubnt	Routing and NATting towards internet
Aruba core switch	http://core-sw.lan.nurd.space	admin	Main switch in the space
Access points	https://10.208.43.254:4343/	admin	Virtual controller for WIFI
Proxmox coherence	https://coherence.lan.nurd.space:8006/	root	Deploy LXC/KVM instances on our old hypervisor (dont use for new stuff)
Proxmox erratic	https://erratic.lan.nurd.space:8006/	root	Deploy LXC/KVM instances on our hypervisor
Erratic IPMI	https://erratic-bmc.lan.nurd.space/	ADMIN	Remote management of erratic
Harmony NAS	https://harmony.lan.nurd.space:5001/	nurds	Used for backups	Has a different password due to pwd requirements
IPAM ip+dns	https://ipam.nurd.space/	ldap	IP and DNS registration
LibreNMS	http://librenms.vm.nurd.space/	nurds	Network device metrics

Per-device port inventory

All devices which are not in librenms need to have documentation for their ports. You can fill this in below:

Fritzbox gamershok

Port	Description
0
1
2	To Edgerouter Lite keuken
3

Netgear keuken

Port	Description
0	To Dell
1
2
3
4
5
6	Slabbar
7
8	Kodi

Phone rookhok

Port	Description
0	To Aruba
1	To Switch rookhok

Switch Rookhok

Port	Description
0
1
2
3	Pi Rookhok
4	To phone rookhok

Netgear Bar

Port	Description
0	VRCade
1	TickTack
2
3	Switch 3d printer hoek
4
5
6
7	To Aruba

Switch 3d printer hoek

Port	Description
0	Printer 3
1	Printer PC
2
3
4	To netgear bar

Zaal 1 switch

TODO: Migrate this to 24p aruba switch, make 2-cable LACP trunk towards core-sw and move zaal 1 ap to 24p aruba switch Device settings

Hostname

nurds-sw-01

Port settings

Port	Description
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23